Te agradesco sobre manera tu respuesta, mas debo reconocer que realizar lo que se indica, supera sobre manera mis conocimientos..., sólo soy usuario:Rodar los ojos:
Thanks: 10
Likes: 5
Dislikes: 0
Results 61 to 70 of 73
Thread: CubePro FIRMWARE Hacking
-
03-17-2023, 02:45 PM #613D Printer Noob
- Join Date
- Apr 2018
- Posts
- 3
- Post Thanks / Like
-
03-18-2023, 12:12 AM #62Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,531
- Post Thanks / Like
-
03-28-2023, 02:36 AM #633D Printer Noob
- Join Date
- Mar 2023
- Posts
- 1
- Post Thanks / Like
How can i know if a 3D printer is good enough for me to work with ?
-
03-28-2023, 07:00 AM #64Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,531
- Post Thanks / Like
The right printer depends on your requirements. There are a lot of options today. Budget, quality, cost of ownership come to mind.
-
04-04-2023, 12:59 PM #653D Printer Noob
- Join Date
- Apr 2023
- Posts
- 1
- Post Thanks / Like
Hello,
could someone send me the CubePro 2.0 hacked firmware, because the file is deleted from the link above? Thank you.
Have a nice day
-
05-15-2023, 07:37 PM #663D Printer Noob
- Join Date
- May 2023
- Posts
- 3
- Post Thanks / Like
TommyDee, The above link for this sticky'ed post is stating the files were deleted, since you are a super moderator are you able to assist in fixing this sticky so that the right files are still accessible?
-
05-16-2023, 12:42 AM #67Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,531
- Post Thanks / Like
Can you point me to the post? Not sure I follow...
-
05-16-2023, 03:27 AM #683D Printer Noob
- Join Date
- May 2023
- Posts
- 3
- Post Thanks / Like
The very first post in this sticky, post #1.
Originally Posted by TommyDee
the link does not work.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CubePro FIRMWARE Hacking
Step 0) Optional. Adviseable. Be sure to spend some of your new cartidges below 100%!
Step 1) Get ready for your CubePro 2.0 by downloading the hacked firmware here
Step 2) Follow the users guide to update your printers firmware (ie stick the USB on your printers side, choose firmware menu, update, etc)
Step 3) Enjoy!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
TommyDee thanked for this post
-
05-16-2023, 06:17 PM #69Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,531
- Post Thanks / Like
Sorry, missed the highlite.
There are a few issues that have cropped up in hacking CubePro. The most common error comes from the chamber heater not functioning properly eventually killing it.
Turns out the method is also different. You actually start the the upgrade with standard f/w; pull it during the operation and drop in the hacked f/w. This is a dangerous thing to do as you never know exactly where you interrupt the loading process.
Anyway, the original hack has been pulled and I am sure that is what happened here.
The hack works great for Cube3 only because of the way it is loaded.
The solution has been to reset chips instead. If you have some skills, maybe look into building Tomuro's circuit. http://www.print3dforum.com/showthre...muro-s-Circuit
There is the occasional ebay offer as well to do this same thing.
-
05-16-2023, 07:25 PM #703D Printer Noob
- Join Date
- May 2023
- Posts
- 3
- Post Thanks / Like
Skill is not something I have whatsoever. I own an ender 3, and n xcube pro duo, never so much as plugged either one in, so I’ve literally never even used a 3d printer. I’m no over then a noob. Bought my ender, but never set it up, and got the xcube for free, someone was getting rid of it on the Facebook marketplace. *♂️. I need to read some guides to figure out where to begin. Thanks for the update though, at least I know not to pursue the hack method and stick with regular 3d systems stuff.
Reply With Quote