Thanks Thanks:  2
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,326
    Post Thanks / Like
    What the??

    Whats that spool holder?

    And you got Bay3 installed too?

  2. #12
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,361
    Post Thanks / Like
    Hahaha... No. That is an offering by the ReKindle guy.

    - - - - - - - - - -

    One of those little good to know things...

    It is 3/5th of a turn on the leveling knobs when adding LokBuild.

    Turn the three knobs => -=THE + WAY=-

    - - - - - - - - - -

    Okay, finally truly leveled the bed as affirmed by printing to the edges.
    These build plates are not completely flat. I have a slight Pringle warp of maybe 40um.
    This cannot be removed from the level adjustment. It is a best average instead.

    Also put an oversized brim on the build plate. Took a V1.87 file and replaced the print with only 4 stripes beyond the extent of the software.
    This is to hold a glue dam for the slurried CubeGlue on the Lokbuild.
    This dam also serves to stiffen the edges of this huge Lokbuild surface so they have less tendency to curl.

    The glue slurry is nearly a 1/4 bottle of glue. The watered down glue had trouble with hydrophobia on the Lokbuild.
    Virgin CubeGlue was much better at adhering to the Lokbuild. Considering this is an "investment slurry", it should last a good long time.

    I think this machine is finally ready for some productive work.

  3. #13
    3D Printer Noob
    Join Date
    Aug 2020
    Location
    Grande-Rivière Château (Jura)
    Posts
    25
    Post Thanks / Like
    Bonjour,
    Je désire faire ce system, pouvez-vous me dire avec quoi vous avez coupé votre cartouche et la dimension en hauteur que vous préconisez.
    Merci.
    Justine

    Translate
    Good morning
    I want to do this system, can you tell me with what you cut your cartridge and the height dimension you advocate.
    Thank you.
    Justine

    JustineCartoucheCoupe.JPG

  4. #14
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,361
    Post Thanks / Like
    Hello Justine. The top of my cartridge cut is 5mm below the top edge of the metal tray it sits in.

  5. #15
    3D Printer Noob
    Join Date
    Aug 2020
    Location
    Grande-Rivière Château (Jura)
    Posts
    25
    Post Thanks / Like
    Merci pour votre réponse.
    Justine

  6. Thanks TommyDee thanked for this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •