Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    3D Printer Noob
    Join Date
    Feb 2019
    Posts
    6
    Post Thanks / Like

    Creality Cr-10 Brand new Heated Bed Not Working!!!

    Hey Guys,

    I just received my Cr-10 in the mail today and set it all up nice and easy. But when I turn the printer on and start the heat up process the temperature of the heated bed does not go up, the nozzle shoots up no problem, but it seems as if the heated bed is not working. Is there something I am missing? Voltage is set to 110.

    Thanks guysdownloader.vip/ccleaner www.happywheels.vip vlc.onl
    Last edited by Jacobcullen; 03-08-2019 at 07:53 PM.

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,443
    Post Thanks / Like
    Check the connection on the heater bed. You can see if it makes a closed loop with an ohm meter. Unplug the unit and check if the circuit is closed from the heater first all the way back to where its power comes from. Something has to close the circuit for it to warm up.

  3. #3
    3D Printer Noob
    Join Date
    Apr 2019
    Posts
    8
    Post Thanks / Like
    Hello,
    2 weeks ago I purchased a brand new Cr10s Pro as well with the same problem.
    Turn out they forgot to put in the cable that connects the power supply with the heater.
    Of course contact your seller first. Because you need to open the box to check which might void your warranty if you haven't spoken to them.


    (sorry can't seem to insert the image but check it bellow)


    https://imgur.com/a/OBeGiQE
    Last edited by ZippyStar; 04-01-2019 at 09:09 AM.

  4. #4
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,443
    Post Thanks / Like
    Oh that never happens! Thanks for posting your experience ZippyStar.

  5. #5
    3D Printer Noob
    Join Date
    Jul 2022
    Posts
    1
    Post Thanks / Like
    I just got my Cr-10 in the mail today and put it all right and simple. But when I turn on the printer and start the heating process the temperature of the bed does not rise, the nose comes out no problem, but it looks like if the heating bed is not working. Am I missing anything? Voltage is set to 110

  6. #6
    3D Printer Noob
    Join Date
    Apr 2019
    Posts
    8
    Post Thanks / Like
    My issue was missing cable on the inside.
    Check the image I shared in my first post.
    Might be a good idea to contact seller before you open the printer to check though.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •