The ReCube Wand Help Thread.

[Mstruthers]

I'm working a couple of Cube 3 printers for my High School.

I have the new parts printed and working, the firmware hacked on the printer and several chips reset to 99%.

What I need or want is the ability to change the filament type for several other chips so that we can also use ABS and INF.

I've tried to contact Tomuro and others for the Pro version.

I'm willing to donate some money for the Pro version.

Does anyone have it or know how to contact Tomuro and get a response?

[dougk12]

I'm happy to reprogram them for you, if you can send to me along with a return envelope with postage. PM me if interested.

I would recommend 2 PLA, 1 INF, 1 ABS (dual color ABS doesn't work) and 2 EKO (PETG) per printer.

[Mstruthers]

Hello Doug,

Thanks for the offer, but I already have the Arduino Nano and have reset the chips that I do have to 98%.

Everything works fine, but I want to change the filament type to ABS or FIL on a few because I have tons of PLA and only one of each for the others. I'm not going to share the ones from home with the printers at the high school.

Or perhaps does anyone have a quick tutorial on how to interface with the chip via the Nano so that I can write up my own reset tool?

[mohan]

I need to make light version I had done the circuit alredy I am not getting about upload batch file to Arduino?

[TommyDee]

Follow the instructions from the first page step by step. The batch file uploads F/W to the Arduino. Batch files are "run".