Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,413
    Post Thanks / Like
    Not that I am aware of. Second best bet is to make one; http://www.print3dforum.com/showthre...muro-s-Circuit

    I have not heard from William for a while. I hope all is well with him.

  2. #12
    3D Printer Noob
    Join Date
    Jul 2022
    Posts
    5
    Post Thanks / Like
    Thanks for the fast reply Tommy and for the detailed instryctions on building the circuit.
    I can easily manage the hardware in a couple of days. What I am not so clear is what kind of script / programm should be loaded on the Arduino Nano board so that it does the resetting of the Cartrige chip when it is connected to it? I have not seen anything on the thread that spells out the Arduino programming that is involved on the resetting cycle (ReCube v. light / pro)
    Can you elaborate?

  3. #13
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,413
    Post Thanks / Like
    The thread gets into the loading of the firmware onto the Arduino. There is an installer. ReCube is basically a stand-alone loader where you need to set a couple of switches in the command line.

  4. #14
    3D Printer Noob
    Join Date
    Jul 2022
    Posts
    5
    Post Thanks / Like
    Can you send me a link to the loading firmware section? I either missed the setp or I am looking at a different thread all together - sorry I'm new in the forum and I am getting crosseyed following the different sources
    http://www.haxtom.com/?p=78 also talks about a ReCube Light vs Pro version (pay option). Any links to that dawnload?

  5. #15
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,413
    Post Thanks / Like
    http://www.print3dforum.com/showthre...d-Help-Thread?

    This was linked in there somewhere.

    The Pro version is a paid version. You would have to get in touch with Tomuro. I have no idea on his current activity with regard to Recube.

  6. #16
    3D Printer Noob
    Join Date
    Jul 2022
    Posts
    5
    Post Thanks / Like
    Thank you bro - appreciate the detailed response and information. I'll try to follow the last thread you provided above.

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •