CR10-X Printing Issues... HELP!

[phantom309oo7]

i'm new to the 3d printing world, I recently purchased a Creality CR 10X.
I printed their sample "butterfly" and it came out FLAWLESS!
but since then, i haven't been able to get a decent print to save my life...
they keep ending up like the picture below...
20190422_060218_resized.jpg

can anyone tell me what the heck is goin on?
any tips are appreciated

[TommyDee]

Welcome to the forum phantom. Can I suggest a clogged extruder? I take it not even the butterfly will come out correctly either?

[phantom309oo7]

BUTTERFLY printed perfectly...

[TommyDee]

Sorry, I meant if you tried to print the butterfly again, would it still print perfectly.

The pictures of the wheel look like you are trying to print with a very thin wall. Very strange pattern. However, the first place to look for "skipping" extrusion is a clogged nozzle and then you look at the filament feed system. All this is assuming the model is slicing correctly and the slicer setup is not set to do something silly, which has been known to happened.

Can you link up the STL file you are using?

[bolsoncerrado]

Yeah looks like a partial clog to me too