Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    3D Printer Noob
    Join Date
    Apr 2019
    Posts
    2
    Post Thanks / Like

    CR10-X Printing Issues... HELP!

    i'm new to the 3d printing world, I recently purchased a Creality CR 10X.
    I printed their sample "butterfly" and it came out FLAWLESS!
    but since then, i haven't been able to get a decent print to save my life...
    they keep ending up like the picture below...
    20190422_060218_resized.jpg

    can anyone tell me what the heck is goin on?
    any tips are appreciated
    Attached Images Attached Images

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    1,990
    Post Thanks / Like
    Welcome to the forum phantom. Can I suggest a clogged extruder? I take it not even the butterfly will come out correctly either?

  3. #3
    3D Printer Noob
    Join Date
    Apr 2019
    Posts
    2
    Post Thanks / Like
    BUTTERFLY printed perfectly...

  4. #4
    Super Moderator
    Join Date
    Nov 2016
    Posts
    1,990
    Post Thanks / Like
    Sorry, I meant if you tried to print the butterfly again, would it still print perfectly.

    The pictures of the wheel look like you are trying to print with a very thin wall. Very strange pattern. However, the first place to look for "skipping" extrusion is a clogged nozzle and then you look at the filament feed system. All this is assuming the model is slicing correctly and the slicer setup is not set to do something silly, which has been known to happened.

    Can you link up the STL file you are using?

  5. #5
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,209
    Post Thanks / Like
    Yeah looks like a partial clog to me too

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •