I have the CR10S with filament sensor. The problem I'm having is that when the filament sensor is triggered and the printing stops my CR10S is also turning off the heated bed temperature (as well as the nozzle) which is causing my prints to come loose of the glass. Is there a setting I'm missing? I'm using Cura 4.0 for splicing.
Thanks: 0
Likes: 0
Dislikes: 0
Results 1 to 3 of 3
-
04-26-2019, 12:37 AM #13D Printer Noob
- Join Date
- Apr 2019
- Posts
- 1
- Post Thanks / Like
CR-10S filament sensor turns off heated bed
-
04-26-2019, 01:12 AM #2Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,386
- Post Thanks / Like
Welcome to the forum, Brainwave. I don't have a CR10 so it is hard to understand how this sensor is wired in. I'm thinking it somehow triggers a F/W routine. Is there someplace you can configure what happens when the filament sensor is triggered?
-
04-26-2019, 09:33 AM #3Administrator
- Join Date
- Nov 2014
- Posts
- 3,332
- Post Thanks / Like
Perhaps there's something related to the slicer's Gcode "when pause is triggered" that affects the bed's Gcode behaviour?
have you tried an alternate slicer? S3D?
Reply With Quote
