Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Apr 2019
    Post Thanks / Like

    Question CR-10S filament sensor turns off heated bed

    I have the CR10S with filament sensor. The problem I'm having is that when the filament sensor is triggered and the printing stops my CR10S is also turning off the heated bed temperature (as well as the nozzle) which is causing my prints to come loose of the glass. Is there a setting I'm missing? I'm using Cura 4.0 for splicing.

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Post Thanks / Like
    Welcome to the forum, Brainwave. I don't have a CR10 so it is hard to understand how this sensor is wired in. I'm thinking it somehow triggers a F/W routine. Is there someplace you can configure what happens when the filament sensor is triggered?

  3. #3
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Post Thanks / Like
    Perhaps there's something related to the slicer's Gcode "when pause is triggered" that affects the bed's Gcode behaviour?

    have you tried an alternate slicer? S3D?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts