Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Creatbot DX600

  1. #1
    3D Printer Noob
    Join Date
    Aug 2019
    Posts
    1
    Post Thanks / Like

    Creatbot DX600

    Has anyone able to disable the auto shutdown feature of this printer? I am trying to connect octopi but everytime I start a print, it eventually times out and shutdown. I was hoping the software was smart enough to detect there is a print job via the serial interface. I can't get any support by the manufacturer as they claim their don't have the firmware. It is is ridiculous that the board is a Rambo variant, and their tools are based on cura and pronterface but rebranded/customize. Kind of defeat the purpose of gpl. The printer is of good quality but it is really annoying you have to transfer the files onto an USB stick and transfer it to the machine. You would expect nowadays everything should be network. It is pain watching the mechanical guys walking from their desk to the printer with a USB stick. I wouldn't have chosen this printer due to the gpl violation but was bought by a previous employee that wanted local support (non existent support).

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,358
    Post Thanks / Like
    Welcome to the forum gorillaz.

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •