Thanks: 0
Likes: 1
Dislikes: 0
Results 1 to 3 of 3
Thread: 2.5D v. 3D - This is great info!
-
09-09-2019, 02:23 AM #1Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,385
- Post Thanks / Like
2.5D v. 3D - This is great info!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
andi42 liked this post
-
12-30-2019, 08:30 AM #23D Printer Noob
- Join Date
- Dec 2019
- Posts
- 1
- Post Thanks / Like
What an awesome concept and follow through! A few more videos like this and I would guess a couple 3D printer manufacturers will try to get a head of the demand for nozzle clearance. BTW just a quick suggestion. I also like to use Linux on occasion but wanted to get native performance so I simply took off the case door and replaced my SSD with a extra blank one and installed the Linux OS on it. It only takes a second to pull the case door off and switch the power and data cables to the Linux drive and boot up native.
-
12-30-2019, 06:30 PM #3Super Moderator
- Join Date
- Nov 2016
- Posts
- 3,385
- Post Thanks / Like
Interesting trick. Care to share the details in a post?
Reply With Quote