Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    3D Printer Noob
    Join Date
    May 2019
    Posts
    13
    Post Thanks / Like

    Reset HOME POSITION after cleaning the hotend ????

    I have updated my Firmware to TinyMachines version 1.1.9_B7 TM 3D SSMDN on my CR10s PRO and used it some months with success !
    The firmware from Creality was simply usuable ... that's why I updated and it has worked well since - thx to TM !

    Now I have disassembled and cleaned the HOT END and put it all together again.

    Now I want to do bed levelling again - first with the wheels beneath the bed - I did this 3-4 times in a row so now it's OK !

    Then I want to recallibrate the autolevelling 5X5 point table - but the 5. (10. 15. 20. 25.) measuring point is OUTSIDE the bed by 6-8 mm !

    In generel there must be a procedure to put the HOME-position where I want it to be - right ?

    How can I "move" the 5X5 table inside the bed again ?

    NOTE: It has NOTHING to do with me changing some G-code, I just cleaned the hotend and turned on the printer - NO FILE is involved at all !

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,297
    Post Thanks / Like
    There are ways to change your settings in the machine using very specific M5xx codes that remain with the machine (uber global settings). Very dangerous option but it is there.
    How to do it specifically with the CR-10 is beyond me. There is even an M5xx command that resets everything to the default F/W settings. I suggest getting that to work first

  3. #3
    3D Printer Noob
    Join Date
    May 2019
    Posts
    13
    Post Thanks / Like
    OK, but I wonder why the coordinate system moved in the X-axis just by cleaning the hotend - it coesn't make sense at all - right ?

    Too I thenk there should be a method to RESET the home position in the firmware or the menu system on the screen but pressing the HOME button seems to just return to the OLD home position and NOT DEFINING a new one.

  4. #4
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,297
    Post Thanks / Like
    Isn't anyone developing the firmware anymore? Sounds like a feature request

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •