Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Jul 2018
    Posts
    6
    Post Thanks / Like

    Anyone else with this stepper driver problem?

    I have been using the HubCap cartage replacement for a long time now. Been a real life saver!

    But one of my stepper filament drivers is now rounded over! It no longer drives at all, just spins in place. See photo.

    20191010_102116.jpg

    Anyone have a solution for this? Maybe something with a set screw to hold tight?

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,347
    Post Thanks / Like
    These motors are fairly cheap to replace. I don't have the direct link but its been posted before. Just google the OEM part number that is on the motor.

    In the meantime you can always swap sides, or swap the motors.

    As an aside, I decided that the stock case is the best alignment tool for the filament driver. Due to its size, it keeps the driver very steady minimizing this wear.

    - - - - - - - - - -

    This might be useful to you...
    http://www.print3dforum.com/showthre...ll=1#post47071

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •