Thanks Thanks:  0
Likes Likes:  3
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: I'm back!

  1. #1
    3D Printer Noob
    Join Date
    Dec 2018
    Posts
    11
    Post Thanks / Like

    Talking I'm back!

    You guys probably don't remember me, i posted a long time ago asking for help with a cube 3d printer, i had a proyect to make 3d printed prosthetics for kids that couldn't afford one, i had to pause the project for a lot of reasons, i got some dead printers and parts from other brands and i managed to get them running a little while ago but i'm still having some issues, but at least it's some progress. I had to modify my nozzle because the original broke, now im using a brass 6mm short nozzle and works ok.

    i wanted to attach an image here but i get an error.


  2. Likes TommyDee, ztoddman1 liked this post
  3. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,347
    Post Thanks / Like
    Nice mod there Jack!

  4. #3
    3D Printer Noob
    Join Date
    Dec 2018
    Posts
    11
    Post Thanks / Like
    thanks! if u guys want the drawings for it i can post them

  5. #4
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,347
    Post Thanks / Like
    Do I need oxygen?

  6. #5
    3D Printer Noob
    Join Date
    Dec 2018
    Posts
    11
    Post Thanks / Like
    allright, ill post them tonight

    - - - - - - - - - -

    Part1.JPG

    41B9c8alG2L._SX342_.jpgrBVaSVu7areAfGQLAAEfpRwjLDA666.jpg

    i used an aluminum bar machined on the lathe and a short nozzle and a normal throat, a quick connector m5 on the bowden end, basically you just remove the plastic at the bottom of the printer head and drill the heat block from the top to make a M6 thread for nozzle and throat, there was a post about it but i cant find it.

  7. Likes ztoddman1 liked this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •