Thanks Thanks:  7
Likes Likes:  8
Dislikes Dislikes:  0
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33
  1. #21
    Regular 3D Printer
    Join Date
    Jan 2020
    Posts
    51
    Post Thanks / Like
    This print have a great hardware but the software and the Noozle Sucks....

    Maybe next mont going for this https://pt.aliexpress.com/item/32978...1ee552bdJe2Qxr

    Whit Dvr8825, and put marlin on it.... tired of trugling...

    - - - - - - - - - -

    I change the socond noozle to the First chip. and works great... but now only have one head ...

    Quote Originally Posted by TommyDee View Post
    Oh yea, those are nasty. We did have one report that the failure is in the chip the hot end is plugged into. That daughter board the chip resides on is probably getting too hot for its own good.

  2. #22
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,037
    Post Thanks / Like
    CubePro Uno

  3. #23
    Regular 3D Printer
    Join Date
    Jan 2020
    Posts
    51
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    CubePro Uno
    idd ahaahah.

  4. #24
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,037
    Post Thanks / Like
    You will end up with a Cube-Super. Looking forward to your implementation.

  5. #25
    Regular 3D Printer
    Join Date
    Jan 2020
    Posts
    51
    Post Thanks / Like
    HY pps.

    Since i destroy my two hotends, i need to rebuild them. Now the problem is. i used the termistor from my Tarantula, and have some deviation. i can print PLA but PETG dont. ABS didnt try it.

    Now im requesting some help to manipulate the temperature over Simplify3D.

    The hotend in use is the E3d V6

    heres some pics:
    20200207_183059.jpg20200207_164902.jpg20200207_183102.jpg

  6. Likes TommyDee liked this post
  7. #26
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,037
    Post Thanks / Like
    Would I be correct in assuming the original thermister was in one of those radial holes along with the original heater wire?

    Is it possible to salvage the original thermister if you're careful or is it one of those things that will never be salvaged in tact?

    Also, why does your screen show extra characters? 03f d:1 l:1 S:0?

  8. #27
    Regular 3D Printer
    Join Date
    Jan 2020
    Posts
    51
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    Would I be correct in assuming the original thermister was in one of those radial holes along with the original heater wire?

    Is it possible to salvage the original thermister if you're careful or is it one of those things that will never be salvaged in tact?

    Also, why does your screen show extra characters? 03f d:1 l:1 S:0?
    Yes they are in that holes. but unfortunately my two got broke...

    i Notice that too, but dint know why get that characters... but i think this number are the menu address, because they change from sub menu to submenu.

    - - - - - - - - - -

    ATM i got a S3d profile, and actually prints, but after a few minutos i got filament error... probably a clog or something.. maybe going to change the Heatbreaker to Full metal.

    Another UPDATE.
    I think i found the problem. didnt change the Temperature on Profile.
    The purge was set to 235 since is PETG and on printing to 195... Changed to 220 and Running for a Hour.

    And found this STL on the Web for E3d V6 direct fix, no need MACgyver Crazy Shit to put on work going to Print two of them.
    Last edited by SixNix; 02-08-2020 at 12:14 PM. Reason: UPDATE

  9. #28
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,037
    Post Thanks / Like
    Does this mean you've matched the thermister to the original or are you doing compensation somewhere?

  10. #29
    Regular 3D Printer
    Join Date
    Jan 2020
    Posts
    51
    Post Thanks / Like
    Compensation m8.

    because the Tevo Tarantula Termistor is way different :S. but still getting the F12 error... now im increasing the temperature 5 by 5 till i get good results.

    On Monday the full metal heatbreak arrives going to give a shot whit full metal. If this nothing works probably next month i will mount a new board..

  11. #30
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,037
    Post Thanks / Like
    Very cool! Wasn't sure the code would allow that.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •