BQ Ciclop : Build your own DIY 3D Scanner for less than $500... Made in Spain!

[waqz36]

Did you set up the motor wires in the correct position? how kuch light environmentally speaking are you using?

Thank you very much for your reply. I have uploaded my settings.

IMG_20160317_152852.jpgIMG_20160317_152838.jpgIMG_20160317_152819.jpg

I can't figure the problem sir. I am hoping you could help me.

[federicosalis77]

I have a question ... The color of disc is important ? I see many diy project with transparent, Black, blue disc...

Inviato dal mio C6603 utilizzando Tapatalk

[federicosalis77]

A new scanner modeled off the BQ just launched on Kickstarter. It has all the same functionality but costs only $99. Also, to print the required parts it has half the print time (14 vs. 28 hours), a smaller print volume (115mm X 110mm x 65mm as opposed to the original 198mm x 160mm x 108mm) and 33% less filament. https://www.kickstarter.com/projects...rce-3d-scanner

I've spent for ciclop 70€ about

Inviato dal mio C6603 utilizzando Tapatalk