Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Feb 2020
    Posts
    1
    Post Thanks / Like

    wrong home position

    I recently bought a cr-10 and it was surprisingly easy to assemble but when i started the bed leveling procedure, the head went to the center instead of the left corner, still on the edge of the plate but dead center. There were no switch calibration settings to verify that the stop switches are activated or not. Anyone else have issues like this? Did I miss some special instructions along the way?
    thanks!

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,037
    Post Thanks / Like
    Welcome to the forum bensonmc. I don't have a CR-10. I also don't know how the CR-10 homes. However, you can try some print files to get an idea of what the machine is using as a home position. Just keep the code simple so you know everything it is doing when reading the print file.

  3. #3
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,273
    Post Thanks / Like
    Is your CR supplied with an ABL? Sort of BL-Touch?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •