Thanks Thanks:  13
Likes Likes:  16
Dislikes Dislikes:  0
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 44
  1. #31
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,943
    Post Thanks / Like
    Done Don't let me sidetrack you. Loving the excellent work instructions!

  2. #32
    3D Printer Noob
    Join Date
    Dec 2017
    Posts
    25
    Post Thanks / Like
    I know 2 of the wires.. Only cause they pulled out when I was moving things around.
    cube3.png

  3. Thanks TommyDee thanked for this post
  4. #33
    Regular 3D Printer
    Join Date
    Feb 2020
    Location
    Germany
    Posts
    115
    Post Thanks / Like
    _20200306_222122.JPG
    At the end it looks like this in my marlin cube but Tommy will try to Figure out if IT could be done without recrimping with maybe minor mods, abl is not really necessary as we can always use mlb(mesh bed leveling)

    - - - - - - - - - -

    _20200426_124204.jpg
    What the hell is this for Material?

    - - - - - - - - - -

    Tommy your shippment is ready,
    3pla 2abs 1inf thing and the Board _20200426_124521.jpg
    Ive left myself 2 cartridges which are sealed, could sell them by intrest

    - - - - - - - - - -

    The Power supplys for heatbeds Just came in...
    _20200426_132058.jpg_20200426_132041.jpg
    Both 29€ shipped, what a steal

  5. #34
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,943
    Post Thanks / Like
    Infinity rinse is a wash away support material. Basically wood glue. It has it's own special rules in the Cubify slicer.

  6. #35
    Regular 3D Printer
    Join Date
    Feb 2020
    Location
    Germany
    Posts
    115
    Post Thanks / Like
    Tommy i cant wait that long, you know me by now... Gonna go medieval on the White one over weekend... Im short on drivers though..

  7. Likes TommyDee liked this post
  8. #36
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,943
    Post Thanks / Like
    Definitely don't let me hold hold you up. You know I'll have a fresh look at it on my end.

  9. Likes razor81 liked this post
  10. #37
    Regular 3D Printer
    Join Date
    Feb 2020
    Location
    Germany
    Posts
    115
    Post Thanks / Like
    Have ordered one more heatbed heater...
    _20200508_214214.jpg
    Have to find a way to mount... ��

    - - - - - - - - - -

    Tomorrow im gonna pick up duet 2Wifi with paneldue 4.3inch Display... Also have a 5set of 2209's coming in, so i dont actually know what is going into the cube (sgen l, fysetc s6 or duet)... I would preferably go with reprap Firmware all the way

    - - - - - - - - - -

    _20200511_175359.jpg
    The duet is there...

    - - - - - - - - - -

    Some more parts Just came in... _20200515_211108.jpg

    - - - - - - - - - -

    Currently working on heatbed Support...

    - - - - - - - - - -

    The heatbed mount is done...
    Next step Electronics... _20200516_192155.jpg

    - - - - - - - - - -

    Thats an 160x160 anet heatbed 12v 120w,
    Ill Post the files on thingiverse when i get everything done

  11. Thanks garufa thanked for this post
    Likes TommyDee, buddybu, garufa liked this post
  12. #38
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,943
    Post Thanks / Like
    <heatshield> nice!

  13. Thanks Energyx thanked for this post
  14. #39
    Regular 3D Printer
    Join Date
    Feb 2020
    Location
    Germany
    Posts
    115
    Post Thanks / Like
    i did something...

    - - - - - - - - - -

    its a pain to get clearance for the fan exaust.... still on it, have tested duet and we got movement...

    - - - - - - - - - -

    So i got the part cooling from behind Figured out... _20200523_134625.jpg

    - - - - - - - - - -

    time for a quick Update on the reprap cube project...
    i have a working heatbed, sensorless homing dialed in, cables have been crimped, additional fan for part cooling printed and mounted
    we have indipendable nozzle heater control....

    now comes the hard work trying to get all of the cube back together...

    - - - - - - - - - -

    _20200524_155207.jpg
    The 12v dell da2 external power supply in(24pin molex only one 8pin Segment used) with a switch to turn PS on/off

    - - - - - - - - - -

    Here is the paneldue 4,3 mounted_20200529_213853.jpg

    - - - - - - - - - -

    The nozzles are ready... _20200531_183949.jpg

    - - - - - - - - - -

    Ive been working on the cube today, so ive Figured out extruder cable Management and aditional Part cooling, will have to lose/trim some plastic parts, but that shouldnt be an issue
    _20200606_204453.jpg_20200606_204517.jpg

    - - - - - - - - - -

    Half way through...
    _20200607_182302.jpg_20200607_182325.jpg

    - - - - - - - - - -

    My Design extruder mounted using original Motor and Position, easy to print and a good way to recycle original cartridge extruders
    _20200607_184004.jpg
    _20200607_184435.jpg
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by razor81; 06-07-2020 at 05:44 PM.

  15. Thanks bolsoncerrado, TommyDee, garufa thanked for this post
    Likes buddybu, TommyDee liked this post
  16. #40
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,943
    Post Thanks / Like
    [page break]

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •