Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Mar 2020
    Post Thanks / Like

    CR-10s with Octoprint + Marlin + EZABL Everything works, but the screen

    Hello Everyone --

    I have more than one CR-10s where I installed the Th3D ABL Pro. For that it is necessary to re-flash the CR-10 with their version of Marlin. I also have a Raspberry Pi with Octoprint to control it.

    If you have a similar setting, you'll know that the screen of the CR-10s will work if you have the Raspberry connected on connected to the printer, even if the printer is off.

    I just realized that one of my printers' screen is not being powered by the printer, but by the raspberry... besides that... everything works...

    so, the question is... is there a way to fix that? where everything in the printer works but the screen doesn't light up?


  2. #2
    3D Printer Noob
    Join Date
    Sep 2022
    Post Thanks / Like
    I don't understand why your screen is not bright. While the printer was actually working. It should work as we expect it to.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts