Thanks Thanks:  4
Likes Likes:  2
Dislikes Dislikes:  0
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32
  1. #1
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,319
    Post Thanks / Like

    CubePro FIRMWARE Hacking

    Step 0) Optional. Adviseable. Be sure to spend some of your new cartidges below 100%!

    Step 1) Get ready for your CubePro 2.0 by downloading the hacked firmware here

    Step 2) Follow the users guide to update your printers firmware (ie stick the USB on your printers side, choose firmware menu, update, etc)

    Step 3) Enjoy!

  2. #2
    3D Printer Noob
    Join Date
    Sep 2019
    Posts
    1
    Post Thanks / Like
    [DEVIS = bolsoncerrado; 45751] Étape 0) Facultatif. Conseillé. Assurez-vous de dépenser certaines de vos nouvelles cartouches à moins de 100%!

    Étape 1) Préparez votre CubePro 2.0 en téléchargeant le micrologiciel piraté ici.

    Étape 2) Suivez le guide de l’utilisateur pour mettre à jour le micrologiciel de votre imprimante (c.-à-d. Collez la clé USB sur votre imprimante, choisissez le menu du micrologiciel, mettez à jour, etc.)

    Étape 3) Amusez-vous! [/CITATION]

    Hello,
    I hope I am in the right place to make this request urgently. I have two pro duo and mono cube with firmware 2.02, latest version of 3ds, can not install version 2.00 hacked via toolbox on version 2.02. or then I find the original 2.00 version of 3ds in order to install the hacked version 2.00. Thanks for considering my post i am in big shit Mr. Bravo for your job, i would be sharing in the future my printing experience with the print3dforum community
    Stéphane from New Caledonia
    Bonjour,
    J’espère que suis au bon endroit pour vous faire cette demande en urgence. Je posséde deux cube pro duo et mono avec un firmware 2.02, dernière version de 3ds, impossible d’installer la version 2.00 piraté via toolbox sur la version 2.02. ou puis je trouver la version original 2.00 de 3ds afin d’installer la version piraté 2.00. Merci de prendre en compte mon post je suis dans la merde grand M. Bravo pour votre boulot, je partagerais à l’avenir mon expérience d’impression avec la communauté de print3dforum
    Stéphane de nouvelle Calédonie

  3. #3
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    There are some tricks to forcing the firmware onto your CubePro printers.
    I have not done this so please understand I am repeating what other people have said.

    1: start the firmware update on the current version 2.02 with legit firmware. Once the firmware starts to update, replace the USB key with the hacked 2.00 FW with the same name as the 2.02 legit firmware. With luck (and probably a few attempts) the machine will continue to install the modified firmware after you replaced the file.

    Hope that helps. Also see "Building Tomuro's Circuit" for alternatives.

  4. #4
    3D Printer Noob
    Join Date
    Jan 2020
    Posts
    6
    Post Thanks / Like
    Hello ,

    I am currently new owner of a cubepro mono.
    I would like to know the advantage of this firmware.

    I read that the cartridges were no longer in production. Is this firmware a bypass and in this case should I have to use original cartridges depending on the material used ? thank you for your answers I am new to the subject but I learn quickly

    For now I able to print a yxz cube its a good start xD
    Last edited by darkzero; 01-31-2020 at 08:50 PM.

  5. #5
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    Welcome to the forum Darkzero. For CubePro, one downgrades to v2.00. There is also a report that the chamber heater stops working. And if that is okay, there is a trick to actually loading the F/W. Oh, and cartridges have to be under 100% (initialized).

    For CubePro users, I highly recommend the ReCube alternative if you have the skills to fabricate such a thing. This simply resets cartridges without messing with the machine.

  6. #6
    3D Printer Noob
    Join Date
    Jan 2020
    Posts
    6
    Post Thanks / Like
    Hi TommyDee thank you for your answer.

    I have done the firmware update with the hacked firmware because mine was in 1.0 and I didn't find any link to downlad 2.0 official


    Do you know if it possible to load the offical 2.0 firmware over the hacked firmware

    I have only one cartridge for now in pla and I will have to buy other so Im agree with you recube is better in this case

  7. #7
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    Yes, you can install factory F/W on top of modified F/W. Current CubePro version is v2.02. If you have trouble finding the original F/W, let me know. This is the the link from the repository site: http://cubify.s3.amazonaws.com/Print...pro%20V2.02.ar Download and install via USB drive.

    The application is: http://cubify.s3.amazonaws.com/Print...bepro_2.02.exe <<== executable link! I can't seem to unlink it.

    ReCube is described in absolute detail here: http://www.print3dforum.com/showthre...muro-s-Circuit
    Last edited by TommyDee; 02-01-2020 at 11:04 PM.

  8. #8
    3D Printer Noob
    Join Date
    Jan 2020
    Posts
    6
    Post Thanks / Like
    Thank you very much for your help
    In this case I will upgrade to the official version and downgrade if necessary using the technique indicated above.

    The main thing now for me is to find original cartridges

  9. #9
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    There's a CubeX cart in PLA purple for $19.99 shipped in the USA on eBay (not my auction).
    Filament is probably bad but it has everything else you need.

    A quick note on downgrading to the hacked F/W. It is a dance. You start the install of legit code; pause that and replace the USB drive with the hacked code. It has limited success where persistence is a key factor.
    Last edited by TommyDee; 02-01-2020 at 11:12 PM.

  10. #10
    3D Printer Noob
    Join Date
    Jan 2020
    Posts
    6
    Post Thanks / Like
    I see I need to find the right timing
    I work in computering so it will be ok i hope for the cartridges indeed ebay seems to be a good place personally I am from France

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •