Thanks Thanks:  1
Likes Likes:  2
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    May 2020
    Posts
    21
    Post Thanks / Like

    Extruder Disassembly

    Hi everyone,

    I want to disassemble extruder motor an aluminium guider since filament is squeezed inside. How can I disassemble the two bolts whose had is damaged?

    If I try to cut o horizontal line with dremel and use an ordinary skrewdriver to turn it off, is it work or cause some other problems?

    What might be causes the squeezing?

    Thanks for all your help.
    WhatsApp Image 2020-06-01 at 22.37.49.jpg
    Last edited by ercnbal; 06-01-2020 at 09:15 PM.

  2. #2
    Regular 3D Printer
    Join Date
    Jan 2020
    Posts
    44
    Post Thanks / Like
    Use torx screwdriver. Give a little bang whit the hammer to fix the Torx and after remove the damage screws.

    I do that a lot..

  3. Thanks ercnbal thanked for this post
    Likes TommyDee liked this post
  4. #3
    3D Printer Noob
    Join Date
    May 2020
    Posts
    21
    Post Thanks / Like
    Yeap, It works perfectly. Thanks for your help SixNix.

  5. Likes TommyDee liked this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •