Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Jun 2020
    Posts
    1
    Post Thanks / Like

    new guy with a problem

    i have a cr10s prov v1. In the gcode I have added g29 for auto bed levelling. I turn off abl during my printing. Once the gcode starts it f does the g29 Abl) but continuously does the g29 command sometimes 5 or 6 times. I re flashed the firmware with tiny machines yet the problem continues. Does anyone know of a quick fix?

    Thanks.

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,943
    Post Thanks / Like
    Hey CWM, welcome to the forum. I don't know how bed leveling works in CR10S. Can you disable it in firmware? Take out the routine so to speak?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •