Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Apr 2020
    Posts
    3
    Post Thanks / Like

    problem with the re-placement PLA filament on CubePRO

    Hi everyone - original PLA prints fine, i tried three other but extruder knocks and prints with holes - or maybe it's a different problem ?? (but whenever I go back to the original one it's ok). Please help

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,976
    Post Thanks / Like
    I have very little trouble with 3rd party PLA. But I don't use exotic PLA like GITD or harder filaments. The Cubes have a fixed filament gap and therefore harder filaments are problematic. Tuning for these filaments is also harder as they typically require a little more heat. As a baseline, I use 3D Solutech Real White PLA in the Cube3 - not a difference worth noting although the material itself is very different in effects.

  3. #3
    3D Printer Noob
    Join Date
    Apr 2020
    Posts
    3
    Post Thanks / Like
    Thanks Tommy I will check a softer filament

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •