Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Aug 2020
    Posts
    1
    Post Thanks / Like

    No idea what's going on with my printer

    Hi all,

    I've had my Creality CR-10 for 2-3 years now and it *was* brilliant. Very, very rarely failed prints and I could essentially just hit go and leave it to it. Last week I completed a 17 hour print without issue, then moved on to the next item on my list and wasn't happy with how the 1st layer was going down, so stupidly decided to try to re-level the bed. Huge mistake as now I can't print anything.

    This is what I have managed to produce after seemingly countless attempts at printing a bed level test. It's supposed to be a solid disc.


    https://i.imgur.com/cwpRsxA.jpg


    https://i.imgur.com/51o4YBa.jpg

    How is it managing to print concentric circles then miss a gap, then print another circle etc. Surely that cannot be a bed level issue as the bed would have to be warped to an impossibly uniform degree?!

    I am using a new filament, however it's the same one I successfully managed to knock out the 17-hour print with.

    Any ideas? As I feel like taking an axe to it currently...

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,033
    Post Thanks / Like
    No idea. However, welcome to the forum.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •