Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Aug 2020
    Post Thanks / Like

    CR-10 Extruder Axis problem

    I have had a CR-10 for several years and have'nt used it since last year. A few days ago i needed to print something and it would not print. At first I thought it was a blockage in the extruder hot end but after several attempts at cleaning and replacing the nozzle found that this wasn't the problem.

    I tried several other things and eventually discovered that the Extruder stepper motor wasn't turning when using the Move axis on the Control Panel, I thought that the cable had been damaged so swapped with the X-axis cable. The Extruder stepper motor turned when the X-axis was moved from the Control Panel.

    I then opened the Control Box and swapped the Extruder cable onto the X-axis and the X-axis worked. The X-axis cable didn't work on the Extruder axis , so I suspected a problem on the Main Board. I bought a replacement Board and fitted it. The same problem still existed. I tried all the previous tests and changes to no avail. The problem looks as though it is not with the Main Board at all.

    Is there anything i have overlooked? Has anybody had the same problem? Can anybody help?

    I hope that I've made myself clear as I can't think of any solution I haven't tried.

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Post Thanks / Like
    Welcome to the forum JohnJS. I do not own a CR-10 but wanted to welcome you to the print3dforum.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts