Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Dec 2014
    Posts
    15
    Post Thanks / Like

    Question Configuring print quality

    I looked at http://www.print3dforum.com/showthre...or-Rapide-Lite but for those values what quality should I expect, draft, high-precision? What parameters do you change to print a draft or the high-quality thing?

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,028
    Post Thanks / Like
    The main quality setting is the layer height... Highest you can get with RL is 0.05.
    Then speed tends to affect results too, the slower the better, but it can be painful slow at 0.05...

    Then of course there's the nozzle head, if you decide to extrude with a 0.2 head it can take you ages to get a ultra high quality print,...but in the end, since this is deposited filament, i dont think you'll notice a "superb" difference.

    BTW; slicing software is as important too, being Cura and Simplify3D the best choices.

 

 

Similar Threads

  1. Print Quality Troubleshooting Guide
    By bolsoncerrado in forum Latest News
    Replies: 1
    Last Post: 05-19-2018, 01:05 PM
  2. Print quality
    By BobenhamHotspur in forum Rapide Lite 3D Printers
    Replies: 18
    Last Post: 10-04-2017, 07:53 PM
  3. Replies: 0
    Last Post: 10-29-2016, 12:49 PM
  4. Replies: 0
    Last Post: 01-19-2015, 03:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •