Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 5 of 5

Hybrid View

  1. #1
    3D Printer Noob
    Join Date
    Feb 2021
    Posts
    3
    Post Thanks / Like

    Print won't start

    I have a CR10 and lately have been having an issue where the printer does not start a print. It doesn't heat the bed or the extruder.

    When the problem happens, it abbreviates the print name and puts an " in.

    They are not long names (shelf) and the files are not larger than others I have done (34mb).

    Last time it did this, I tried formatting my sd card. It started working after power cycling the printer. That is not working this time, however. I tried printing an older gcode I had previously done, and it worked fine.

    I am not sure what is unique about these gcodes.

    Using Simplify3d to generate. I believe it is a 1gb microSD card.
    I am at work now, and can upload the file tonight if that helps.


    TIA

    - - - - - - - - - -

    Update: I had dropped the layer height to .16, I think. I switched it to .2 and then it worked.

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,235
    Post Thanks / Like
    Are you at the edge of the microprocessor's memory?

  3. #3
    3D Printer Noob
    Join Date
    Feb 2021
    Posts
    3
    Post Thanks / Like
    I don't think so. I changed the layer height and now it seems to work. I have done larger prints than this one before.

  4. #4
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,235
    Post Thanks / Like
    Interesting. I don't know enough about the code to know how that could be.

  5. #5
    3D Printer Noob
    Join Date
    Feb 2021
    Posts
    3
    Post Thanks / Like
    i think if it is not a multiple of .04, you may get errors

  6. Likes TommyDee liked this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •