Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    3D Printer Noob
    Join Date
    May 2019
    Post Thanks / Like

    Printing mould for big sculpture ??

    I have a CR10S and wants to print a sculpture of a cat in brass.

    I have a STL-file of the cat but want to make the mould hollow with a 3-4 mm thick wall.

    Because the cat is big I wants to divide the mould into a number of parts.

    Is that the path to go and how to do it ?

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Post Thanks / Like
    Sounds like MeshMixer might help.

  3. #3
    3D Printer Noob
    Join Date
    Mar 2021
    Post Thanks / Like
    Thanks For Sharing Valueable Information.Keep Sharing

  4. #4
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Post Thanks / Like
    Depending on the size you want to achieve, you may want to take a look at LuBan. Then once you have the part splitted in multiples, just use infill 0 and several walls thick and that's all.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts