Thanks Thanks:  2
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 3 of 3

Threaded View

  1. #1
    Regular 3D Printer
    Join Date
    Sep 2018
    Post Thanks / Like

    Lightbulb Autoloading print files for Cube3

    For anyone with an open source solution that is still hand feeding filament into feed assemblies, I built off of MajorOCD's old work and created custom print files to load then purge filament. I also created "Purge Only" versions that are handy for really cleaning out the print tips. I've been using these for a while and shared with others, some brand new to 3d printing, and I have received tons of positive feedback.

    All of the files set the printer temp to 260 Celsius so you don't have to worry about what was in the print jet previously.

    I also put a short how-to video together.

    Last edited by dougk12; 07-26-2021 at 10:12 PM.

  2. Thanks TommyDee thanked for this post
    Likes TommyDee liked this post


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts