CubePro 2 picture of wiring on the motherboard

[jammincomedy]

Hello. Does anybody have a picture of the wiring of the motherboard on the CubePro 2 from the back? I have my printer put back together after replacing an extruder but must have the wires mixed up because the display is not turning on. Thanks.

- - - - - - - - - -

I figured out where I had the wire plugged in incorrectly. So, now I can see the display.

[bolsoncerrado]

Perhaps you wanna share a pic yourself, for archival purposes?

[dougk12]

I'm excited to see this project completed Jammin. I know you've put a ton of work into it and with zero prior experience with the CubePro that is no small task. Please keep us informed once you're able to rip off successful prints.

[jammincomedy]

Here's my configuration after putting everything back together. Thanks again.

IMG_4445.jpg

IMG_4446.jpg

[sheilacorvin298]

The 3600x motherboard is the only option that will helpful to you to come out of this hectic issue because I personally using it even for the heavy work.

[trekspecies]

Jammin, I can't wait for the project to be finished. There's no doubt that you put in a lot of effort, especially considering your lack of familiarity with the CubePro. When you've figured out how to copy prints successfully, be sure to let us know.