Looking for the filament loading and unloading .cube3 files

[MarkRon]

Hi, I am looking for the files from this post http://www.print3dforum.com/showthre...-The-Filament)

the part where is says "Download the Load Filament files here >>> https://drive.google.com/open?id=0B6...W1ZX2t1V29IdVk"

I click the link but it says I need access? I sent off a request but I don't know if these are still up or not.

I am wondering if anyone has a copy, thanks.

[TommyDee]

All you can do is request the files. The user doesn't participate here anymore.

You are also welcome to check some of my alternatives on thingiverse - https://www.thingiverse.com/qube3bot/designs
I'm still sold on the universal hubs - http://www.print3dforum.com/showthre...-Universal-Hub

[MarkRon]

Thanks for the reply, I checked out your designs but I don't see the filament loading or unloading files.

[TommyDee]

Aha, now I understand what you are after. I have not captured that print file. Hopefully someone else here has this in their archives and is willing to post it.

If you want to, you could try to recreate the file using the Cube3Editor by our own Buddybu. It is all based on BFB/G-code commands to drive filament.

[dougk12]

Here you go! It was ~12 posts below this one

http://www.print3dforum.com/showthre...iles-for-Cube3

Please read the instructions and watch the YouTube video. Because the load phase moves filament so quickly, doing it wrong can damage the OEM PTFE tube inside of the feed assembly - forcing a bit of maintenance. Cutting the filament at the correct angle is the key.