Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    3D Printer Noob
    Join Date
    Feb 2022
    Post Thanks / Like

    Angry Help, can't activate NIB Cube Pro Need 4-digit pin

    Hello, this is my first post! I have recently received a brand new, never used Cube pro that somebody decided they didn't want to set up (for four years). So, I set it up and attempted to give it a go, but the Cube requires a four-digit pin that you can only get from 3DS. I contacted them and received a pin, but it did not work. I can't update the firmware unless I get past this point, and frankly, I don't have time to input the 10000 possible combinations. Does anyone have any advice? I would really hate to have to tear this thing down for parts.

    Never in my life have I ever encountered such a quality machine marred by such naked greed
    Last edited by Justpastalaska; 03-08-2022 at 04:16 PM.

  2. #2
    Super Moderator
    Join Date
    Nov 2016
    Post Thanks / Like
    The naked greed is what killed the line, and put you in this predicament.

    The code is hashed from the serial number. The serial number is printed on a label that can be found on the machine. Unless someone mucked with the controller board, there is no reason the code wouldn't match. You might report the error to 3DS and see if they can help you further. They have a way of resetting them from other reports.

    Good luck.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts