Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Post Thanks / Like

    IKEA hack lets you create a 3D printer enclosure for cheap

    For those who use fused deposition modeling (FDM) 3D printers, it’s a common fact that calibrating temperatures for various parts of the 3D printing process can not only be a frustrating process, but also entirely necessary if quality 3D printed objects are the expected outcome - and when are they not?

    One of the most popular solutions for this has been in housing 3D printers within a controlled environment that not only keeps the air around the 3D printer stable, but also prevents temperature fluctuations from unexpected breezes.

    While there are plenty of options for purchasing a ready-made 3D printer enclosure, note everybody is willing or able to break into their piggy banks to purchase one. Like most other things, the next best option is to build a solution yourself. Thankfully, Instructables user ‘phatima’ recently did this himself using cheap and widely-available IKEA furniture and generously shared his build instructions.

    “Having recently acquired a 3d printer, i quickly noticed that, despite calibrations, there were a few temperature-related problems,” explains phatima.
    “The chief among them was the amount of time the bed took to heat up, the room was not able to hold the temperature unless the doors were shut and the curtains pulled - this lead to another problem, I was overheating! We also had problems with layer delamination on larger prints in ABS - something that could be solved by keeping the printer in a warmer environment.”

    After playing around with some spare IKEA “Lack” tables that he had laying around, phatima noticed that when they were stacked atop each other, his printer was able to perfectly fit inside. From here, he knew that upcycling the tables into a 3D printer enclosure would be the perfect way of creating a low-cost controlled environment for his 3D printer.

    In his build instructions, phatima outlines that in order to build an enclosure for yourself, two of the Lack tables are needed to provide the foundation of the structure, which retail for $9.99 apiece.

    “You want to drill the holes off-center in the bottom of the legs, as when it comes to drilling holes in the top of the other table, there is a metal screw that is used to attach the tabletop to the leg. Once you've drilled the holes in the bottom of the legs, use these holes as a guide to drill into the top of the other table,” he explains.

    Additionally, phatima recommends that users try their hardest to not be too vigorous with the assembly until it’s had the opportunity to dry overnight.

    Aside from saving valuable desk space, an added bonus of attaching the two tables together, according to phatima, has been a massive increase in stability, which has helped reduce the vibrations of his printer.

    Once the frame of the enclosure has been assembled, the remainder of the Instructable centers around mounting four transparent viewing windows, sensors, a fan, an embedded wire system and a Raspberry Pi for users to monitor the temperature of the environment in real time without needing to open the enclosure.

    “With the enclosure, the room that my printer is in is at a much more comfortable temperature, which is by far the biggest benefit in the summer months,” adds phatima.

    Although he has yet to do a long print inside of his new enclosure, doing so is next on his agenda and he plans on providing updates afterwards.
    For those interested in building a 3d printer enclosure similar to phatima’s using the IKEA Lack tables, be sure to read the project instructions in-full over at Instructables.

  2. Likes elize.mow liked this post
  3. #2
    Join Date
    Jan 2016
    Moscow Russia, Naples USA
    Post Thanks / Like
    very wise...
    We can try to make something like this fo our diode lasers

  4. #3
    Regular 3D Printer
    Join Date
    Dec 2018
    Post Thanks / Like
    Fantastic effort.
    This be tried for experimenting.

  5. #4
    3D Printer Noob
    Join Date
    Nov 2020
    Post Thanks / Like
    That will be really helpful for more consistent printing! Thank you!

  6. #5
    3D Printer Noob
    Join Date
    Jun 2022
    Post Thanks / Like
    Thank you for this article, very helpful!



Similar Threads

  1. Looking for good, but cheap filaments in Canada.
    By mike4u37 in forum 3D Print Materials & Filaments
    Replies: 8
    Last Post: 01-11-2019, 12:18 PM
  2. Cube 3 enclosure
    By Bleky in forum Cube3
    Replies: 31
    Last Post: 03-31-2017, 04:34 PM
  3. The 3D Nefertiti Hack
    By bolsoncerrado in forum Latest News
    Replies: 6
    Last Post: 03-01-2016, 05:24 PM
  4. IKEA LEDs to lighten the printbed
    By JonatanJacobsson in forum Rapide Lite 3D Printers
    Replies: 21
    Last Post: 01-26-2015, 02:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts