-

Originally Posted by
Jao
Hi AngryPanda
Which one is the z-Stepper cable and what does the stepper controller look like? Is it a hard thing to find and replace?
How could I test if this is indeed the problem?
I wish that I could get some customer support from OWL.
I finally figured out a way to print large objects utilizing the whole build platform using free software. I would love to share my findings with the community but
I need to get the big red paperweight working again first.
Best
J
Hi Jao
can you share us about the software, I am looking curious to try
-
Hi guys
I just installed the printer, but the display and LED not responding. I use PC with Windows 7, I use DVI to VGA adapter to connect with Morpheus. when I start a print led only blinks that's all, nothing has happening but Z axis is working. kindly give your suggestions
-

Originally Posted by
karthik.pdy
Hi guys
I just installed the printer, but the display and LED not responding. I use PC with Windows 7, I use DVI to VGA adapter to connect with Morpheus. when I start a print led only blinks that's all, nothing has happening but Z axis is working. kindly give your suggestions
If that problem continues you should contact the company.. Your LED display could have gotten damaged during the shipping process.. They should have direct instructions on how to do that testing part to rule that out
-
Can anyone guide me how to install aurduino, when I plugged USB it's automatically detected it's okay or not ?
-

Originally Posted by
karthik.pdy
Can anyone guide me how to install aurduino, when I plugged USB it's automatically detected it's okay or not ?
Did you receive link to the Youtube videos on how to install everything? If you followed instructions there then you should not have any problem.
My recommendation to you is this:
Restart your laptop.. then from your software try to print something (without resin)..
and look at the printer led panel to see if you see the layers there.. (make sure that you see each layer for 20-25 minutes).. If you see all the layers in led panel then you should be fine.. If you see screen blinking or layers don't show up then your led monitor could be damaged..
PS: use appropriate glasses for uv light so that you don't damage your eyes
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Does your laptop not have HDMI? Not sure why you would want to use DVI to VGA. I don't think an analogue VGA signal will be as clean as a digital one. Try DVI to DVI or HDMI to HDMI.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Hi Every one, Happy new year to all
I have a doubt
why we should not replace with a Solid VAT with PDMS coating
share your suggestion/ideas !!!
-
I've not used a printer with PDMS coating, however I assume that the peeling process is a bit better with the PDMS coating. The difference comes down to cost. The film layer on the Morpheus will last far longer and doesn't really become cloudy over long term use. I have printed with 6 litres using the same film. PDMS needs to be replaced after using 2 litres as it will become cloudy and degrade the prints, making the whole process very expensive.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Administrator
@karthik.pdy where did you get the morpheus resin? at which price?