Simple but very effective way to attach a holder for your RasPi camera (or any similar cam) to your Rapide Lite or Prusa like alu frame (using FrameMount.stl).

Print as many MountClip.stl's as you need. I use around 10-12 for mine. I suggest you to print the female coupler and the CamBase.stl using high infill (60% or more) and use the female coupler on the FrameMount side, NOT on the CamBase side, for rigidity purposes.

I've tested TONS of cam holders from different points and places and this works best for me. Let me know if you use this!