Thanks Thanks:  0
Likes Likes:  2
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Post Thanks / Like

    Kickstarter 3D printer (Peachy Printer) funds 'used to build house'

    Crowdfunding website Kickstarter is investigating claims that money given to a tech project was instead used to build a home.

    One co-founder of the Peachy Printer scheme accused the other of stealing more than 324,000 Canadian dollars ($353,000; £174,000) and spending it.

    Efforts to make the device have been halted. A confession video has been posted to the site as proof.

    But the alleged thief told the BBC it had been filmed "under duress".

    The loss is said to have come to light in 2014, but there had been no mention of it in the dozens of development updates posted to Kickstarter until now.

    Missing money

    The firm had marketed its tech as being the "world's most affordable 3D printer" The company Rinnovated Design had promised to build the first 3D printer and scanner costing $100.
    It raised 651,091 Canadian dollars for the scheme via Kickstarter and a further 74,167 Canadian dollars via another crowdfunding site, Indiegogo. Both platforms let start-ups seek donations from the public, and offer backers rewards that correspond to the value of the pledges.
    Rinnovated Design was co-owned by Rylan Grayston, who headed up technical development, and David Boe, who took care of financial matters.
    In a lengthy statement on the business's website, Mr Grayston said the funds raised by the campaigns were initially put in Mr Boe's personal account, from which he took 324,716.01 Canadian dollars.

    Mr Grayston said that when Mr Boe "came clean" he agreed to repay the sum, and a decision was taken not to make this public.
    "He claims to have spent the Kickstarter funds on materials for his house, but he hadn't gotten the construction far enough to get that value back out through his mortgage draws," wrote Mr Grayston.

    "As stated in the repayment agreement, the plan was that as David reached each stage of his build, he would payout a percentage [of] the draw to Peachy Printer.

    "David made good on the first payment, and defaulted on the final two.

    "The last of these payments was on March 2nd 2015, after which I was unable to contact him for months. When I finally did speak to him, I found that he had gotten a lawyer and quite drastically changed his tone."

    Mr Grayston said he notified police in October 2015 after failing to resolve the matter.
    Confession clip

    A video posted to YouTube - said to have been filmed in 2014 but only made live on 10 May 2016 - appears to show Mr Boe confessing to the alleged crime.

    "I made a mistake, I apologise and I am trying to make it right," he said.
    "Everyone knows it's wrong and I'm not trying to deny it."
    When the BBC spoke to Mr Boe he was not aware that Mr Grayston had released the footage and other documents.
    Mr Boe confirmed he had appeared in the video, but declined to comment about whether he had actually taken money.
    "That was taken under duress, extreme duress, at that date," he said.
    "They actually told me exactly what they wanted said in that.
    "I'm not going to talk about [the allegations] right now."
    Kickstarter said the matter under was investigation.
    "Anyone who abuses our system and the trust of our community exposes themselves to legal action," said its spokesman David Gallagher.
    "We're reaching out to the law enforcement officials who are already looking into this case, and will assist however we can."
    But the Canadian police indicated the case was at an early stage.
    "The Saskatoon Police Service received a complaint in November 2015 regarding the theft of crowdsourced funds from a 3D printer company," said its director of public affairs Alyson Edwards.
    "Since then detectives from our economic crime section have conducted some preliminary investigation - however, they are still waiting for more information from the company's owners.
    "Once they receive that information the crown prosecutor will be consulted to determine if this is a criminal case, or if it should proceed through civil litigation."

    Mr Grayston could not be reached for comment.

    But on his project's Kickstarter page he acknowledged some of the details were "mind-boggling".

    "I fully expect that some people will think this is just a big conspiracy, but if that were true do you really think I'd be asking you to write to my local police?
    "After looking at all the evidence, if you still think this is a scam - I encourage you to report that to my city police."
    Several of the project's backers posted sympathetic messages to the page, but others wrote that they had more questions, including why it took so long for the alleged theft to be announced.
    Mr Grayston has said that Rinnovated Design is now "broke" after spending the rest of the money on development and wages.
    However, he added that he still intends to "spin operations back up" at a later date.

  2. Likes filaments, PotrickJohny liked this post
  3. #2
    3D Printer Noob
    Join Date
    May 2022
    Post Thanks / Like
    Are 3D printers used to build houses? What a crazy idea. but I like that idea.

  4. #3
    3D Printer Noob
    Join Date
    Jun 2022
    United Sites
    Post Thanks / Like
    In a time where promises of 3D printing have become commonplace, Peachy Printer is a small but very specific project that aims to build a house using 3D-printing technology. With support from backing from Kickstarter, this team of engineers and computer programmers are aiming to take the sky away from the big names in the industry by offering the world's first 3D printer designed for home use.Enable GingerCannot connect to Ginger Check your internet connection
    or reload the browserDisable in this text fieldRephraseRephrase current sentenceLog in to edit with Ginger×

  5. #4
    3D Printer Noob
    Join Date
    Jun 2022
    Post Thanks / Like
    good post lik eit



Similar Threads

  1. Replies: 0
    Last Post: 10-29-2016, 12:49 PM
  2. Replies: 0
    Last Post: 08-24-2015, 01:00 PM
  3. Morpheus 3D Printer: 1st LIPS Printer to hit Kickstarter - 7 days left!
    By bolsoncerrado in forum Morpheus 3D Printers
    Replies: 0
    Last Post: 08-24-2015, 01:00 PM
  4. Build your own printer...for less than $200!
    By bolsoncerrado in forum Latest News
    Replies: 0
    Last Post: 05-05-2015, 09:25 AM
  5. Build...the most printable 3D printer!
    By bolsoncerrado in forum Latest News
    Replies: 0
    Last Post: 04-12-2015, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts