Could you see the difference between the 2 Iron Thrones printed on Cetus 3D Printer?
Left one: printed using a 0.4mm nozzle at 0.15mm layer thickness.
Right one: printed using a 0.2mm nozzle at 0.07mm layers thickness. Spray painted.
The cube is a 20mm test cube and the models were scaled to about 7.5cm in height.
We are trying to optimize printing conditions that use 0.05/0.07mm z-resolution printed by 0.2mm nozzle, so that customers could get HD prints right out of the box.



13419166_1223993957640670_7705154202678308038_n.jpg