Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    3D Printer Noob
    Join Date
    Dec 2014
    Posts
    17
    Post Thanks / Like

    [DOCS] Rapide Lite Manual V1.3

    I am not positive, but I believe this is the finished or a more complete manual. I woke up this morning with an email from Ethan asking me to post the manual in the forum for people who are asking. So I am not sure if it is complete, but here it is Version 1.3:

    http://adf.ly/vTjBk

    As I am on a mobile device I am Not capable of uploading the off as a pdf, so here is a Google drive link. I would greatly appreciate it if someone clicks on the link and then uploads it as a file not a link.

    Thanks Anthony

    (Edit by Admin: plus the cute JiaJia video! )

    Last edited by TechRat101; 12-22-2014 at 04:09 PM. Reason: Fixed Link

  2. #2
    Regular 3D Printer
    Join Date
    Dec 2014
    Location
    North of the wall
    Posts
    134
    Post Thanks / Like
    says I cannot access the document because it violates googles terms of service?(something with the file it seems maybe?)

  3. #3
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,326
    Post Thanks / Like
    Yes, same warning here.

  4. #4
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,326
    Post Thanks / Like
    OK ethan emailed me the manual as well, so i updated the first post and i'll stick it now.


    OK checked the new version: it comes with instructions on how to run the cables in the chasis but it reads:

    Place both Extruder and X Axis cables over the top of the frame and locate to the inside of the frame structure using the anchor fasteners and cable

    Using the included cable ties fix the cable neatly up the inside of the frame (F.22).

    but I guess we didnt get any ties or anchors right?

  5. #5
    Regular 3D Printer
    Join Date
    Dec 2014
    Posts
    131
    Post Thanks / Like
    Hi - I got both ties and anchors. I fixed the cables neatly into the gaps in the upright supports using just the zip ties and it seems to work well.

  6. #6
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,326
    Post Thanks / Like
    Am I alone then having not recieved them?

    Can you post some detail pics clayton?

  7. #7
    Regular 3D Printer
    Join Date
    Nov 2014
    Location
    Brisbane, Australia
    Posts
    117
    Post Thanks / Like
    I did not get them either .... So i just used small cable ties as i have a billion of them

  8. #8
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,326
    Post Thanks / Like
    Pics please!

  9. #9
    Regular 3D Printer
    Join Date
    Nov 2014
    Location
    Brisbane, Australia
    Posts
    117
    Post Thanks / Like
    Here is how I did my cabling, much better as they don't get caught up now.


    WIN_20141221_075641.JPG


    WIN_20141221_075649.JPG

  10. #10
    Regular 3D Printer
    Join Date
    Dec 2014
    Posts
    174
    Post Thanks / Like
    Can someone post the pdf? I get taken to a site that wants to install an .exe when I click the link above.

 

 

Similar Threads

  1. My Rapide Lite 312
    By clayton in forum Rapide Lite 3D Printers
    Replies: 16
    Last Post: 11-07-2016, 11:50 AM
  2. Creation Workshop Manual
    By bolsoncerrado in forum Morpheus 3D Printers
    Replies: 0
    Last Post: 02-29-2016, 11:20 AM
  3. Rapide Lite 500
    By bolsoncerrado in forum Rapide Lite 3D Printers
    Replies: 2
    Last Post: 04-16-2015, 08:12 PM
  4. Rapide Lite 350
    By Bah in forum Rapide Lite 3D Printers
    Replies: 19
    Last Post: 03-05-2015, 04:10 PM
  5. [DOCS] The (semi)Official Rapide LITE FAQ
    By bolsoncerrado in forum Rapide Lite 3D Printers
    Replies: 1
    Last Post: 11-15-2014, 10:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •