Thanks Thanks:  35
Likes Likes:  27
Dislikes Dislikes:  0
Page 48 of 49 FirstFirst ... 3846474849 LastLast
Results 471 to 480 of 481
  1. #471
    3D Printer Noob
    Join Date
    Mar 2021
    Posts
    1
    Post Thanks / Like
    Hi everyone, I'm new to this forum and work at a school in the Netherlands. We have 2 cube pro printers. I'm trying the hack but somehow both can't download the firmware from the usb-stick. Anyone else had this problem? I did format it to fat32

  2. #472
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,356
    Post Thanks / Like
    CubePro upgrades are a bit wonky sometimes. I might recommend a ReCube cartridge recharge solution for CubePro.

    There are some tricks to force the F/W but be warned that there is a report of failed temperature sensor and odd behavior of the chamber heater.

  3. #473
    3D Printer Noob
    Join Date
    Apr 2021
    Location
    Buffalo NY
    Posts
    10
    Post Thanks / Like
    Well downloaded the original firmware, patched the firmware as instructed! Installed patched firmware! and all I have is a printer that print the test print! any ideas on this one

    - - - - - - - - - -

    Well downloaded the original firmware, patched the firmware as instructed! Installed patched firmware! and all I have is a printer that print the test print! any ideas on this one

  4. #474
    Expert 3D Printer
    Join Date
    May 2019
    Location
    Earth.
    Posts
    382
    Post Thanks / Like
    Hello rlb! Welcome to the forum. What are you trying to print? If you are downloading STL files from a site like Thingiverse, then you will need to convert those STL models into Cube3 files. You can use the 3DSystems software, Cube Print, for that purpose.

  5. #475
    3D Printer Noob
    Join Date
    Apr 2021
    Location
    Buffalo NY
    Posts
    10
    Post Thanks / Like

    New to This Game

    Quote Originally Posted by buddybu View Post
    Hello rlb! Welcome to the forum. What are you trying to print? If you are downloading STL files from a site like Thingiverse, then you will need to convert those STL models into Cube3 files. You can use the 3DSystems software, Cube Print, for that purpose.
    I just decided to try my hand at this 3D printing thing so I bought a couple of broken 3D Cube printers. I'm 70 and a retired Field Service Tech and i restore antique radios and other electronics for for fun lol. Well I have 2 of thoise printers up and running and have had great success with printing. I have the Cube 3D Gen 2, the Cube EKO and Cube 3D Gen 3! The gene 3 is the one giving me the problems! I got it cheep and they said it was working but sold as parts! Had a lot of trouble with leveling the bed because some one had run the the locking set screw down to tight but manage to get that straightened out! The printer won't sign in my WIFI network. It keeps telling me wrong password and I no it's right so I no there is a problem there! But I should be able to put file on a USB drive and print them right? I wasn't aware of the file format difference thou so I'll give that a try! Thanks for your help and insight! I'm pretty sure this printer was a failed upgrade when I got it but I love problem so I'll getter done.

    - - - - - - - - - -

    Quote Originally Posted by buddybu View Post
    Hello rlb! Welcome to the forum. What are you trying to print? If you are downloading STL files from a site like Thingiverse, then you will need to convert those STL models into Cube3 files. You can use the 3DSystems software, Cube Print, for that purpose.
    I just decided to try my hand at this 3D printing thing so I bought a couple of broken 3D Cube printers. I'm 70 and a retired Field Service Tech and i restore antique radios and other electronics for for fun lol. Well I have 2 of thoise printers up and running and have had great success with printing. I have the Cube 3D Gen 2, the Cube EKO and Cube 3D Gen 3! The gene 3 is the one giving me the problems! I got it cheep and they said it was working but sold as parts! Had a lot of trouble with leveling the bed because some one had run the the locking set screw down to tight but manage to get that straightened out! The printer won't sign in my WIFI network. It keeps telling me wrong password and I no it's right so I no there is a problem there! But I should be able to put file on a USB drive and print them right? I wasn't aware of the file format difference thou so I'll give that a try! Thanks for your help and insight! I'm pretty sure this printer was a failed upgrade when I got it but I love problem so I'll getter done.

  6. #476
    Expert 3D Printer
    Join Date
    May 2019
    Location
    Earth.
    Posts
    382
    Post Thanks / Like
    You have quite a set of printers. I had a cube 2 as well, but the motherboard was fried, so I upgraded it to a BTT SKR V1.3 with TMC 2209 stepper drivers. It works great now. I had an ekocycle as well, but I converted that to a cube3. I aquired another cube3 that wouldn't heat properly, nor connect to my wifi network. I currently have that one torn down to the frame and I am planning on rebuilding it using a duet-skr with reprap firmware using a new BTT board designed for RepRap firmware. Be sure to keep asking questions as they come up. There are a bunch of us that will help you out!

  7. #477
    3D Printer Noob
    Join Date
    Jul 2020
    Posts
    1
    Post Thanks / Like
    Quote Originally Posted by bolsoncerrado View Post
    1.1 Toolkit published!

    v1.1

    - Removed MaterialCode verification (e.g. Print ABS files with PLA Cartridge) (Cube 3 only)
    - Activated Telnet (Port 23) (no username / password needed) (Cube 3 only)
    this does not work please help
    ?????

  8. #478
    3D Printer Noob
    Join Date
    Apr 2021
    Location
    Buffalo NY
    Posts
    10
    Post Thanks / Like
    Is there a Tutorial on that EKO to Cube3 conversion here

  9. #479
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,356
    Post Thanks / Like
    Quote Originally Posted by dirk View Post
    this does not work please help
    ?????
    V1.1 never worked.

    - - - - - - - - - -

    Quote Originally Posted by rlb245 View Post
    Is there a Tutorial on that EKO to Cube3 conversion here
    We went through the conversation but I still lack confidence in the solution. My best guess is to install the v1.14B firmware renaming the F/W file to the name of the Ekocycle version 1.05. I cannot swear to that because I have never done this. However, some here are experts at this. Let's see how my memory is functioning ;]

  10. #480
    Expert 3D Printer
    Join Date
    May 2019
    Location
    Earth.
    Posts
    382
    Post Thanks / Like
    You are close TD. You need two thumb drives. The first one is the real ekocycle 1.05 firmware, the second is the Cube 3 firmware 1.14b renamed to match the ekocycle firmware name. Start the upgrade with the real one, then when the update starts, remove the thumb drive with the original firmware and replace it with the thumb drive containing the renamed firmware and finish the update. It's been a while, but the process is on here or on openbuilds

  11. Thanks TommyDee thanked for this post
 

 

Similar Threads

  1. IKEA hack lets you create a 3D printer enclosure for cheap
    By bolsoncerrado in forum Latest News
    Replies: 3
    Last Post: 11-20-2020, 04:07 AM
  2. Replies: 25
    Last Post: 08-30-2018, 09:47 PM
  3. Replies: 0
    Last Post: 02-26-2017, 10:55 AM
  4. [ HOW TO ] Modify the Cube3 Cartridges to accept 3rd party filament (WIP)
    By bolsoncerrado in forum Cube3
    Replies: 2
    Last Post: 01-31-2017, 09:17 AM
  5. The 3D Nefertiti Hack
    By bolsoncerrado in forum Latest News
    Replies: 6
    Last Post: 03-01-2016, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •