Thanks Thanks:  9
Likes Likes:  4
Dislikes Dislikes:  0
Page 15 of 16 FirstFirst ... 513141516 LastLast
Results 141 to 150 of 158
  1. #141
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,069
    Post Thanks / Like
    Quote Originally Posted by shawnhenson View Post
    Is that the nozzle with hot ends already put in ? I dont need the push nut part. I have 12 of them .
    And how do i send youoney for this?
    The thing they thread on the Teflon tubing is a barrel nut. I don't use them for any configuration. Those are the bane of Cube3!

    - - - - - - - - - -

    I'll send you the one I took off that nozzle It'll be in the mail tomorrow.
    t's-already to go.

    - - - - - - - - - -

    OD is 3/8", t=.015", tube OD=.134 (ID is exactly 3mm! Get the drill bit; down 20mm 'til you hit aluminum)

    - - - - - - - - - -

    The push-nut should be there Monday, Shawn. It's taped to a sticky note.

    - - - - - - - - - -

    Here's what the insides of the nozzle look like in case you're interested Shawn...

    nozzle_insides.PNG

    This one was carbon-poisoned by burnt PLA switching to ABS.
    I try to keep high temp nozzle for ABS and PETG separate from PLA/low temp nozzles.
    Last edited by TommyDee; 04-19-2019 at 07:12 PM.

  2. #142
    3D Printer Noob
    Join Date
    Jan 2019
    Posts
    4
    Post Thanks / Like
    In search of an ABS filament chip for Cube 3d. I live in Michigan. If you have one that I can get please let me know. Thank you.

  3. #143
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,069
    Post Thanks / Like
    I can get you one. PM an address. What fill-level do you want it set to?

    - - - - - - - - - -

    Set to Cube3, ABS, NGR, at 98%. It'll go out today, MM.

  4. #144
    3D Printer Noob
    Join Date
    Jan 2019
    Posts
    4
    Post Thanks / Like
    PM sent

  5. #145
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,069
    Post Thanks / Like
    Temporal distortion

    You do know that you can print ABS with PLA chip right?
    You can make an ABS print and use the decoder to change the material to PLA (say material 92), then recompile it.
    I say this for a different reason; the fact that 3rd party ABS works wonders using the Ekocycle profile (print using the offline Ekocycle slicer).
    Then you would change machine type and material in the file to print on Cube3.
    Last edited by TommyDee; 04-27-2019 at 03:33 PM.

  6. #146
    3D Printer Noob
    Join Date
    May 2019
    Location
    Los Angeles
    Posts
    8
    Post Thanks / Like
    Need empty cartridges or spare chips. Thanks

  7. #147
    Super Moderator
    Join Date
    Nov 2016
    Posts
    2,069
    Post Thanks / Like
    Keep a close eye on eBay. There tend to be good deals on Cube3 carts from time to time. You just have to beat me to it
    Basic going rate should be in the neighborhood of $25-$30.

    I found I ran out of internal spools very quickly.

    You can reprogram Cube and Cube2 chips to the supported chips now that you have the pro version of ReCube working.

  8. #148
    Regular 3D Printer
    Join Date
    Apr 2018
    Posts
    52
    Post Thanks / Like
    Hi all, I am selling 2 perfectly working ABS chips. 1 is at 78% and the other is around 80%.

    - - - - - - - - - -

    Hi all, I am selling 2 perfectly working ABS chips. 1 is at 78% and the other is around 80%.

  9. #149
    3D Printer Noob
    Join Date
    May 2019
    Posts
    4
    Post Thanks / Like
    Does anyone have any empty complete carts, pla chips or hotends for sale?

  10. #150
    Regular 3D Printer
    Join Date
    Nov 2017
    Location
    YouEssEh
    Posts
    55
    Post Thanks / Like

    I have a few...

    Quote Originally Posted by migelraton View Post
    Does anyone have any empty complete carts, pla chips or hotends for sale?

    I have few extra chips (full) and nozzles. What do you need?

 

 

Similar Threads

  1. [FOR SALE] BQ (White) Witbox
    By bolsoncerrado in forum 3D Printers - Other Brands
    Replies: 4
    Last Post: 02-11-2016, 03:01 PM
  2. Rapide Lite 200 for sale in Marketplace !!
    By Joao in forum Rapide Lite 3D Printers
    Replies: 7
    Last Post: 04-19-2015, 12:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •