Thanks Thanks:  8
Likes Likes:  10
Dislikes Dislikes:  0
Page 1 of 15 12311 ... LastLast
Results 1 to 10 of 141
  1. #1
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like

    BFB (G-Code) for Cube 3

    I think we need a list of BFB codes for the Cube 3 for reference. There is a wiki for G-Code for RepRap but there are a LOT of differences from the Cube 3. http://reprap.org/wiki/G-code I don't know a lot about them so I'm hoping other people will make additions and corrections.

    Code Description Example
    M101 Undo Retract
    M103 Retract
    M104 Snn Pn Tool 1 Temp - P ? M104 S215 P1
    M106 Pnn Fan ON - Device ? M106 P100
    M106 Snn Fan ON - Power 0-255 (255 = 100%) M106 S255
    M107 Fan OFF
    M108 Snn Set Extruder Speed M108 S7.0
    M227 Pnn Snn Gnn Fnn Set Retraction - Prime - Suck - G ? - F ? M227 P450 S450 G450 F600
    M551 Pnn Snn Command used for extruder 1 (left) prime when at the waste bin. P is amount primed. S is speed of extrusion. M551 P700 S35
    M552 Pnn Snn Same as above but for extruder 2 (right) M552 P700 S35
    G1 Xnn Ynn Znn Fnn Move X Y Z F = movement speed G1 X-2.495 Y-1.747 Z0.3200 F1800.0
    G4 Pn Pause n seconds G4 P7

    This is only a handful of entries. I will update it as I get more info. Please contribute whatever you can.
    Last edited by MegaloDon; 03-29-2017 at 01:28 AM.

  2. Thanks bolsoncerrado thanked for this post
    Likes bolsoncerrado, tamer1an liked this post
  3. #2
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    245
    Post Thanks / Like
    M551 P700 S35 = command used for extruder 1 (left) prime when at the waste bin. P700 is amount primed (I think), S35 speed of extrusion(i think)
    M552 Pxxx Sxx = same as above but for extruder 2 (right extruder)

  4. #3
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,349
    Post Thanks / Like
    Found the 3D Builder SDK link...

    https://developer.microsoft.com/en-u...lder-resources

    3dbuildersdk.PNG

    Let's see if we can get some things from there... This isn't the cube3 SDK, but maybe it has some references we could use.

  5. Likes tamer1an liked this post
  6. #4
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like
    Quote Originally Posted by Mythandar View Post
    M551 P700 S35 = command used for extruder 1 (left) prime when at the waste bin. P700 is amount primed (I think), S35 speed of extrusion(i think)
    M552 Pxxx Sxx = same as above but for extruder 2 (right extruder)
    Thanks! Updated.

  7. #5
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,349
    Post Thanks / Like
    HA!... !!! I got a print driver to show up in Windows 10 over TCP/IP! I think...

    Anyway, the SDK is a print driver that you can install as a printer if you just ignore a lot of prompts.

    win10drvr.PNG

    yep, somehow I created a TCP/IP port while the printer was printing.

    yeptcp-ip.PNG

    - - - - - - - - - -

    Settings appear to be what 3D Builder has. This does allow you to set defaults.

    driver-inbldr.PNG
    Last edited by TommyDee; 03-25-2017 at 10:55 PM.

  8. #6
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    HA!... !!! I got a print driver to show up in Windows 10 over TCP/IP! I think...

    yep, somehow I created a TCP/IP port while the printer was printing.
    Can you print to it?

    I wonder if you could have the output go to a file.

  9. #7
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,349
    Post Thanks / Like
    Technically, yes, it does send a .cube3 file straight to the printer over USB.

    The driver, however, is identical.

    It wouldn't let me duplicate the original name... a message easily skipped over.

    It will be 30-someodd minutes until my current print completes.

    There is a "print to file" option in the driver. Not sure if that really functions yet.

    - - - - - - - - - -

    Can't find the print to file yet.

    But I did find a list of dependent 3D Systems DLL files in the driver properties.
    What would something named 3DSystemsCubeMFCCube.dll do? MFC is M$ for BFB

  10. #8
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    What would something named 3DSystemsCubeMFCCube.dll do? MFC is M$ for BFB
    Are you asking what a dll file is or what that specific dll file is? Either way, I think Mythandar could answer that better than me. I know some coding, and know what dll's are, but haven't really worked with dll's.

  11. #9
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,349
    Post Thanks / Like
    Sometimes I find nuggets in DLL files when you scroll through them.

    - - - - - - - - - -

    This is either an encoder or a decoder... but it has all the variables referencing BFB. I found several such libraries in 3DS DLL's

    3DSystemsCubebfblib.dll ??0BlowFishEnc@@QEAA@PEBD@Z ??0bfb@@QEAA@AEBV0@@Z ??0bfb@@QEAA@PEBDPEAVConfig@@_N@Z ??1BlowFishEnc@@UEAA@XZ ??1bfb@@QEAA@XZ ??4bfb@@QEAAAEAV0@AEBV0@@Z ?AddSquare@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ char_traits@D@std@@V?$allocator@D@2@@std@@MMMMMH@Z ?AddTimeandDist@bfb@@QEAAXMMM@Z ?BlowFishEnc_decipher@BlowFishEnc@@AEAAXPEAK0@Z ?BlowFishEnc_encipher@BlowFishEnc@@AEAAXPEAK0@Z ?BreakAngle@bfb@@QEAANMMMMMM@Z ?CubeType@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?DRM@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char_t raits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?Decipher@BlowFishEnc@@AEAAXAEAI0@Z ?Decipher@BlowFishEnc@@QEAAXQEAEH@Z ?Density@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ch ar_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?DoThePurge@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@MMMM_NH MH@Z ?DwellSecs@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?DwellSteps@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?Encipher@BlowFishEnc@@AEAAXAEAI0@Z ?Encipher@BlowFishEnc@@QEAAXQEAEH@Z ?EnterRestLocation@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ @Z ?EquateMatrices@bfb@@QEAAXQEAY03M0@Z ?ExtractRotationMatrix@bfb@@QEAAXQEAY02MQEAY03M@Z ?ExtruderCurrentAdjustment@bfb@@QEAAXPEAV?$basic_s tringstream@DU?$char_traits@D@std@@V?$allocator@D@ 2@@std@@HH@Z ?F@BlowFishEnc@@AEAAII@Z ?FimrwareVersion@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@PE AD@Z ?GetExtruderDistance@bfb@@QEAAMH@Z ?GetOutputLength@BlowFishEnc@@AEAAKK@Z ?GetTotalMaterial@bfb@@QEAAMXZ ?GetTotalMinutes@bfb@@QEAAMXZ ?Hatch@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char _traits@D@std@@V?$allocator@D@2@@std@@H@Z ?InitToIdentity@bfb@@QEAAXQEAY03M@Z ?Initialization@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z ?LayerThickness@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?LeaveRestLocation@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ @Z ?MatVecMult3x3@bfb@@QEAAXQEAY00MQEAY02M0@Z ?MatVecMult@bfb@@QEAAXQEAY00MQEAY03M0@Z ?MaterialType@bfb@@QEAAXPEAV?$basic_stringstream@D U?$char_traits@D@std@@V?$allocator@D@2@@std@@UMATE RIAL_PROPERTIES@@@Z ?MinFirmwareVersion@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @PEAD@Z ?Move@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char_ traits@D@std@@V?$allocator@D@2@@std@@MMMM@Z ?OutputBinaryCube@bfb@@QEAAHAEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@0 M@Z ?PrintTimeandDist@bfb@@QEAAXXZ ?PrinterType@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?Raft@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char_ traits@D@std@@V?$allocator@D@2@@std@@H@Z ?SET_CUBE_QUICK_LAYER_SETTINGS@bfb@@QEAAXMHHHMH@Z ?SetAccelDeccelRates@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@HH@Z ?SetAccelDeccelStartStop@bfb@@QEAAXPEAV?$basic_str ingstream@DU?$char_traits@D@std@@V?$allocator@D@2@ @std@@HH@Z ?SetAccelDeccelXYThreshold@bfb@@QEAAXPEAV?$basic_s tringstream@DU?$char_traits@D@std@@V?$allocator@D@ 2@@std@@H@Z ?SetAutomaticReverseAndPrime@bfb@@QEAAXPEAV?$basic _stringstream@DU?$char_traits@D@std@@V?$allocator@ D@2@@std@@HH@Z ?SetExtruderSpeed@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H M@Z ?SetExtruderTemp@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HH _N@Z ?SetJumpParams@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HHH@ Z ?SetMaterialE1@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@UMAT ERIAL_PROPERTIES@@@Z ?SetMaterialE2@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@UMAT ERIAL_PROPERTIES@@@Z ?SetMaterialE3@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@UMAT ERIAL_PROPERTIES@@@Z ?SetMaterialLengthE1@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@UMATERIAL_PROPERTIES@@@Z ?SetMaterialLengthE2@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@UMATERIAL_PROPERTIES@@@Z ?SetMaterialLengthE3@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@UMATERIAL_PROPERTIES@@@Z ?SetVectorType@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?SetXsize@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?SetYsize@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?ShortSupportTag@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@_N @Z ?SidewalkBorders@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@_N @Z ?SidewalkPerf@bfb@@QEAAXPEAV?$basic_stringstream@D U?$char_traits@D@std@@V?$allocator@D@2@@std@@MM@Z ?Sidewalks@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?SupportBorders@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@_N@ Z ?Supports@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?ToolChangePurge@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HH H@Z ?ToolChangeReverse@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ HHH@Z ?TotalBuildMaterial@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @M@Z ?TotalBuildTime@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?TotalLayerCount@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H@ Z ?TotalLayerTime@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@MMM @Z ?TotalZLayer@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?TransMatInverse@bfb@@QEAAXQEAY03M0@Z ?TurnExtruderFanOff@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @@Z ?TurnExtruderFanOn@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ @Z ?TurnExtruderFanOn@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ H@Z ?TurnOffAllExtuders@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @@Z ?TurnOffAllExtuders@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @HH@Z ?TurnOffAutoLevelComp@bfb@@QEAAXPEAV?$basic_string stream@DU?$char_traits@D@std@@V?$allocator@D@2@@st d@@@Z ?TurnOnAutoLevelComp@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@@Z ?TurnOnChamberHeat@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ H_N@Z ?TurnOnExtuder@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HH@Z ?TurnOnExtuderStop@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ HH@Z ?TurnOnExtuderStop@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ HHHH@Z ?Version@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ch ar_traits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?XMLDRM@bfb@@QEAAXPEAV?$basic_stringstream@DU?$cha r_traits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?XMLDensity@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLEndSummary@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z ?XMLFirmwareVersion@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @PEAD@Z ?XMLHatch@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLLayerDistance@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H M@Z ?XMLLayerDistanceCalculationDescription@bfb@@QEAAX PEAV?$basic_stringstream@DU?$char_traits@D@std@@V? $allocator@D@2@@std@@@Z ?XMLLayerThickness@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ M@Z ?XMLMinFirmwareVersion@bfb@@QEAAXPEAV?$basic_strin gstream@DU?$char_traits@D@std@@V?$allocator@D@2@@s td@@PEAD@Z ?XMLPrinterType@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLRaft@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ch ar_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLSetCokeBottleNumberE1@bfb@@QEAAXPEAV?$basic_st ringstream@DU?$char_traits@D@std@@V?$allocator@D@2 @@std@@M@Z ?XMLSetCokeBottleNumberE2@bfb@@QEAAXPEAV?$basic_st ringstream@DU?$char_traits@D@std@@V?$allocator@D@2 @@std@@M@Z ?XMLSetCokeBottleNumberE3@bfb@@QEAAXPEAV?$basic_st ringstream@DU?$char_traits@D@std@@V?$allocator@D@2 @@std@@M@Z ?XMLSetMaterialE1@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@U MATERIAL_PROPERTIES@@@Z ?XMLSetMaterialE2@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@U MATERIAL_PROPERTIES@@@Z ?XMLSetMaterialE3@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@U MATERIAL_PROPERTIES@@@Z ?XMLSetMaterialLengthE1@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialLengthE2@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialLengthE3@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialWeightE1@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialWeightE2@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialWeightE3@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetXsize@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?XMLSetYsize@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?XMLSidewalk@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLStartSummary@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z ?XMLSupports@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLTotalBuildMaterial@bfb@@QEAAXPEAV?$basic_strin gstream@DU?$char_traits@D@std@@V?$allocator@D@2@@s td@@M@Z ?XMLTotalBuildTime@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ M@Z ?XMLTotalLayerCount@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @H@Z ?XMLTotalZLayer@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?XMLVersion@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?area_Tri@bfb@@QEAAMPEAUBFB_VERTICES@@00@Z ?bfbCommandStr@bfb@@QEAAXPEAD@Z ?bte@bfb@@QEAAHXZ ?collinear@bfb@@QEAA_NPEAUBFB_VERTICES@@00@Z ?copyCube@bfb@@QEAAHPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@AEAV23@MH HHHVConfig@@@Z ?copyCubeHershey@bfb@@QEAAHPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@AE AV23@MHHHHVConfig@@@Z ?copyCubeOld@bfb@@QEAAHPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@AEAV23 @_NMHHHH@Z ?decryptStream@BlowFishEnc@@UEAAKPEBDKPEAD@Z ?determineZExtents@bfb@@QEAAHXZ ?encryptStream@BlowFishEnc@@UEAAKPEBDKPEAD@Z ?getLayerDistance@bfb@@QEAAMM@Z ?getLayerNumber@bfb@@QEAAMXZ ?getLayerTime@bfb@@QEAAMM@Z ?loadCube@bfb@@QEAAHPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@HH_NP6AXH @ZM@Z ?matmult@bfb@@QEAAXQEAY03M00@Z ?quickLayerAdjust@bfb@@QEAA_NAEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ 0PEAVPrintMode@@MHH@Z ?summaryOutput@bfb@@QEAAHAEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@0@Z

    - - - - - - - - - -

    and it goes on with some encryption tips for Blowfish...

    lowFishEnc@@6B@ ??_7EncryptionInterface@@6B@  ??1EncryptionInterface@@UEAA@XZ  ??0EncryptionInterface@@QEAA@PEBD@Z 3DSystemsCubeUtilities.dll ?HeapReAlloc 8HeapAlloc <HeapFree ©GetProcessHeap RInitializeCriticalSectionEx DRaiseException VGetLastError AHeapSize ÿ DecodePointer DeleteCriticalSection üOutputDebugStringA SetLastError QInitializeCriticalSectionAndSpinCount iGetModuleFileNameW lGetModuleHandleExW «LoadLibraryW ¨ CreateActCtxW  ActivateActCtx ø DeactivateActCtx jFindActCtxSectionStringW %QueryActCtxW PInitializeCriticalSection )EnterCriticalSection ¥LeaveCriticalSection ‚TlsAlloc „TlsGetValue …TlsSetValue ƒTlsFree GlobalAlloc .GlobalReAlloc +GlobalLock *GlobalHandle 2GlobalUnlock 'GlobalFree ±LocalAlloc ¸LocalReAlloc µLocalFree þSetErrorMode  CloseHandle »WaitForSingleObject GetCurrentThreadId CSetThreadPriority ¬ResumeThread ®LoadResource ÀLockResource `SizeofResource FindResourceW /GlobalSize ÓMulDiv FormatMessageW ¥ CopyFileW ÔMultiByteToWideChar ÝWideCharToMultiByte %EncodePointer ÔGetSystemDirectoryW ¤FreeLibrary §FreeResource mGetModuleHandleW ¤GetProcAddress ªLoadLibraryExW "GlobalDeleteAtom lstrcmpW GlobalAddAtomW $GlobalFindAtomW &GlobalFlags GetCurrentProcessId lstrcmpA )GlobalGetAtomNameW cFileTimeToSystemTime GetVersionExW “ CompareStringW ZGetLocaleInfoW GetUserDefaultUILanguage  CreateFileW nFindClose yFindFirstFileW ˜FlushFileBuffers BGetFileSize PGetFullPathNameW GetVolumeInformationW ¾LockFile TReadFile ùSetEndOfFile SetFilePointer “UnlockFile ñWriteFile #DuplicateHandle GetCurrentProcess lstrcmpiW GetCurrentDirectoryW bFileTimeToLocalFileTime <GetFileAttributesW 9GetFileAttributesExW CGetFileSizeEx DGetFileTime lstrcpyW GetWindowsDirectoryW ¦VerSetConditionMask ªVerifyVersionInfoW èGetTempFileNameW êGetTempPathW aSleep ùGetTickCount ºGetProfileIntW ÁSearchPathW ±VirtualProtect GetUserDefaultLCID ŽFindResourceExW jIsDebuggerPresent pIsProcessorFeaturePresent ÎGetCommandLineA »RtlUnwindEx ·RtlPcToFileHeader µRtlLookupFunctionEntry ç CreateThread XExitThread >HeapQueryInformation WExitProcess ×GetSystemInfo «VirtualAlloc ³VirtualQuery ÝGetSystemTimeAsFileTime 0SetStdHandle EGetFileType uIsValidCodePage ªGetACP GetOEMCP ¹GetCPInfo ÇGetStdHandle ÅGetStartupInfoW ®RtlCaptureContext ¼RtlVirtualUnwind ’UnhandledExceptionFilter RSetUnhandledExceptionFilter pTerminateProcess hGetModuleFileNameA 0QueryPerformanceCounter .GetEnvironmentStringsW £FreeEnvironmentStringsW GetTimeZoneInformation ÌGetStringTypeW âGetConsoleCP ôGetConsoleMode RReadConsoleW SetFilePointerEx wIsValidLocale LEnumSystemLocalesW ™LCMapStringW ýOutputDebugStringW ðWriteConsoleW üSetEnvironmentVariableA KERNEL32.dll QUnregisterClassW KUnhookWindowsHookEx uGetMessageW GTranslateMessage µ DispatchMessageW pPeekMessageW ÀSendMessageW IsWindowVisible GetActiveWindow UGetKeyState kValidateRect 5GetCursorPos SetWindowsHookExW  CallNextHookEx pGetMenuStringW nGetMenuState ¨GetSubMenu jGetMenuItemID iGetMenuItemCount ïInsertMenuW
    AppendMenuW «RemoveMenu Ö DrawTextW Õ DrawTextExW ÛGrayStringW 9TabbedTextOutW 6GetDC ÂGetWindowDC ©ReleaseDC  BeginPaint é EndPaint I ClientToScreen ±ScreenToClient ©GetSysColor FillRect DGetFocus ? CheckMenuItem à EnableMenuItem éSetMenuItemBitmaps eGetMenuCheckMarkDimensions ëSetMenuItemInfoW |GetParent !LoadBitmapW §RegisterWindowMessageW sGetMessagePos tGetMessageTime tPostMessageW ¡ DefWindowProcW  CallWindowProcW ŽRegisterClassW GetClassInfoW GetClassInfoExW q CreateWindowExW IsWindow þIsChild ­ DestroyWindow SetWindowPos ÎGetWindowPlacement SetWindowPlacement
    BeginDeferWindowPos ¢ DeferWindowPos å EndDeferWindowPos >GetDlgItem =GetDlgCtrlID ÚSetFocus GetCapture ä EnableWindow cGetMenu åSetMenu ATrackPopupMenu _UpdateWindow ÃSetActiveWindow EGetForegroundWindow ÛSetForegroundWindow ‰RedrawWindow ´ScrollWindow üSetScrollPos ¤GetScrollPos ýSetScrollRange ¥GetScrollRange %ShowScrollBar øSetPropW ˜GetPropW ­RemovePropW ÖGetWindowTextW ÕGetWindowTextLengthW 'GetClientRect ÏGetWindowRect  AdjustWindowRectEx QMessageBoxW EMapWindowPoints W CopyRect EqualRect ~PtInRect ÉGetWindowLongW SetWindowLongW ÈGetWindowLongPtrW SetWindowLongPtrW "GetClassLongPtrW %GetClassNameW ³GetTopWindow \GetLastActivePopup ½GetWindow 'LoadIconW ûSetScrollInfo £GetScrollInfo yWinHelpW VMonitorFromWindow wGetMonitorInfoW (ShowWindow WMoveWindow > CheckDlgButton IsWindowEnabled SetWindowTextW IsDialogMessageW 9GetDesktopWindow ‚RealChildWindowFromPoint ×GetWindowThreadProcessId ¬GetSystemMetrics ªGetSysColorBrush %LoadCursorW èInflateRect òIntersectRect « DestroyMenu lGetMenuItemInfoW 7SystemParametersInfoW V CopyImage ¶SendDlgItemMessageA uPostQuitMessage ª DestroyIcon < CharUpperW $ShowOwnedPopups ÏSetCursor ¤ DeleteMenu SetTimer KillTimer óInvalidateRect IsIconic yGetNextDlgGroupItem ÄSetCapture ¨ReleaseCapture |WindowFromPoint Ê DrawFocusRect úSetRectEmpty aOffsetRect
    IsRectEmpty )LoadImageW Î DrawIconEx KGetIconInfo zGetNextDlgTabItem IMessageBeep GetAsyncKeyState â EnableScrollBar ÜHideCaret õInvertRect [NotifyWinEvent n CreatePopupMenu gGetMenuDefaultItem DMapVirtualKeyW d CreateDialogIndirectParamW ç EndDialog 1LoadMenuW áSetLayeredWindowAttributes ó EnumDisplayMonitors bOpenClipboard K CloseClipboard ÌSetClipboardData ß EmptyClipboard Ò DrawStateW É DrawEdge Ì DrawFrameControl SetWindowRgn LUnionRect IsMenu \UpdateLayeredWindow TMonitorFromPoint  BringWindowToTop LoadAcceleratorsW ETranslateAcceleratorW îInsertMenuItemW OUnpackDDElParam °ReuseDDElParam TGetKeyNameTextW @TrackMouseEvent 0GetComboBoxInfo IsZoomed «GetSystemMenu wPostThreadMessageW wWaitMessage VGetKeyboardLayout ûIsCharLowerW CMapVirtualKeyExW ?ToUnicodeEx ZGetKeyboardState Z CreateAcceleratorTableW ¦ DestroyAcceleratorTable T CopyAcceleratorTableW ÑSetCursorPos ùSetRect ïSetParent 7LockWindowUpdate ÉSetClassLongPtrW BGetDoubleClickTime U CopyIcon çSetMenuDefaultItem SModifyMenuW RegisterClipboardFormatW ; CharUpperBuffW FrameRect Ï DrawMenuBar œ DefFrameProcW ž DefMDIChildProcW FTranslateMDISysAccel ÿIsClipboardFormatAvailable ¶GetUpdateRect 1SubtractRect m CreateMenu @MapDialogRect ¨ DestroyCursor ÐGetWindowRgn Í DrawIcon USER32.dll ( CopyMetaFileW 3 CreateDCW ÷GetDeviceCaps  BitBlt ) CreateBitmap 1 CreateCompatibleDC D CreateHatchBrush L CreatePen K CreatePatternBrush P CreateRectRgn V CreateSolidBrush DeleteDC DeleteObject WEscape ZExcludeClipRect ëGetClipBox (GetObjectType 0GetPixel 9GetStockObject TGetViewportExtEx WGetWindowExtEx \IntersectClipRect bLineTo PtVisible ”RectVisible ŸRestoreDC ¦SaveDC ÓSelectClipRgn _ExtSelectClipRgn ÕSelectObject ÖSelectPalette ÜSetBkColor ÝSetBkMode òSetMapMode ïSetLayout GetLayout üSetPolyFillMode ýSetROP2 SetTextColor SetTextAlign )GetObjectW pMoveToEx TextOutW aExtTextOutW SetViewportExtEx SetViewportOrgEx
    SetWindowExtEx SetWindowOrgEx tOffsetViewportOrgEx uOffsetWindowOrgEx §ScaleViewportExtEx ¨ScaleWindowExtEx " CombineRgn A CreateFontIndirectW Q CreateRectRgnIndirect |PatBlt þSetRectRgn Í DPtoLP JGetTextExtentPoint32W J CreatePalette #GetNearestPaletteIndex ,GetPaletteEntries >GetSystemPaletteEntries ’RealizePalette ÔGetBkColor RGetTextMetricsW 0 CreateCompatibleBitmap 7 CreateDIBitmap OEnumFontFamiliesW CGetTextCharsetInfo ùSetPixel StretchBlt 6 CreateDIBSection åSetDIBColorTable 9 CreateEllipticRgn Ellipse DGetTextColor O CreatePolygonRgn ŒPolygon Polyline •Rectangle NEnumFontFamiliesExW 8GetRgnBox sOffsetRgn R CreateRoundRectRgn RoundRect pFrameRgn PtInRegion ûSetPixelV ^ExtFloodFill øSetPaletteEntries kFillRgn ÖGetBoundsRect XGetWindowOrgEx `LPtoDP UGetViewportOrgEx PGetTextFaceW GDI32.dll AlphaBlend  TransparentBlt MSIMG32.dll – OpenPrinterW O DocumentPropertiesW  ClosePrinter WINSPOOL.DRV TRegCloseKey ]RegCreateKeyExW hRegDeleteKeyW …RegOpenKeyExW ’RegQueryValueExW lRegDeleteValueW sRegEnumKeyExW ¢RegSetValueExW ADVAPI32.dll È SHGetFileInfoW 7ShellExecuteW é SHGetPathFromIDListW ñ SHGetSpecialFolderLocation À SHGetDesktopFolder $ DragQueryFileW DragFinish ƒ SHBrowseForFolderW z SHAppBarMessage SHELL32.dll K PathFindExtensionW M PathFindFileNameW u PathIsUNCW › PathStripToRootW 7StrFormatKBSizeW  PathRemoveFileSpecW SHLWAPI.dll  DrawThemeText  DrawThemeParentBackground M OpenThemeData CloseThemeData
    DrawThemeBackground * GetThemeColor  GetCurrentThemeName G IsAppThemed J IsThemeBackgroundPartiallyTransparent : GetThemeSysColor E GetWindowTheme 3 GetThemePartSize UxTheme.dll ~ CoTaskMemAlloc  CoTaskMemFree •OleDuplicateData ËReleaseStgMedium ' CoDisconnectObject  CoCreateInstance ƒ CoUninitialize S CoInitialize T CoInitializeEx ž CreateStreamOnHGlobal § DoDragDrop ¦OleLockRunning ŽOleCreateMenuDescriptor ’OleDestroyMenuDescriptor ¸OleTranslateAccelerator 1IsAccelerator ˜OleGetClipboard \ CoLockObjectExternal ÊRegisterDragDrop ÍRevokeDragDrop ole32.dll OLEAUT32.dll  LresultFromObject  AccessibleObjectFromWindow  CreateStdAccessibleObject OLEACC.dll tGdiplusShutdown ! GdipAlloc í GdipFree uGdiplusStartup 6 GdipCloneImage ˜ GdipDisposeImage !GdipGetImageGraphicsContext ,GdipGetImageWidth "GdipGetImageHeight 'GdipGetImagePixelFormat %GdipGetImagePalette &GdipGetImagePaletteSize Q GdipCreateBitmapFromStream P GdipCreateBitmapFromScan0 + GdipBitmapLockBits . GdipBitmapUnlockBits  GdipDeleteGraphics ° GdipDrawImageI M GdipCreateBitmapFromHBITMAP [ GdipCreateFromHDC GdipSetInterpolationMode ¸ GdipDrawImageRectI gdiplus.dll ; ImmGetContext k ImmReleaseContext M ImmGetOpenStatus IMM32.dll  PlaySoundW WINMM.dll

  12. #10
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like
    I ran that through my magic decoder ring and it says "whatthefckareyoudoingtryingtodecodemypropriatarye ncryptedsht".
    Last edited by MegaloDon; 03-26-2017 at 05:52 PM.

 

 

Similar Threads

  1. [ HOW TO ] Use other slicers with cube 3
    By Mythandar in forum Cube3
    Replies: 313
    Last Post: 12-17-2020, 02:43 AM
  2. [ THING ] Printable Cube 3 Filament (re)Winder
    By chaman in forum Cube3
    Replies: 25
    Last Post: 08-01-2017, 04:35 PM
  3. Cube 3 enclosure
    By Bleky in forum Cube3
    Replies: 31
    Last Post: 03-31-2017, 04:34 PM
  4. ERROR Code T24: Temperature Error
    By bolsoncerrado in forum Cube3
    Replies: 3
    Last Post: 03-02-2017, 04:35 PM
  5. Converting 12v/24v power supply to remote (G-code) switching
    By bolsoncerrado in forum 3D Hardware
    Replies: 9
    Last Post: 06-30-2016, 04:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •