Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 28
  1. #1
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    420
    Post Thanks / Like

    BFB (G-Code) for Cube 3

    I think we need a list of BFB codes for the Cube 3 for reference. There is a wiki for G-Code for RepRap but there are a LOT of differences from the Cube 3. http://reprap.org/wiki/G-code I don't know a lot about them so I'm hoping other people will make additions and corrections.

    Code Description Example
    M101 Undo Retract
    M103 Retract
    M104 Snn Pn Tool 1 Temp - P ? M104 S215 P1
    M106 Pnn Fan ON - Device ? M106 P100
    M106 Snn Fan ON - Power 0-255 (255 = 100%) M106 S255
    M107 Fan OFF
    M108 Snn Set Extruder Speed M108 S7.0
    M227 Pnn Snn Gnn Fnn Set Retraction - Prime - Suck - G ? - F ? M227 P450 S450 G450 F600
    M551 Pnn Snn Command used for extruder 1 (left) prime when at the waste bin. P is amount primed. S is speed of extrusion. M551 P700 S35
    M552 Pnn Snn Same as above but for extruder 2 (right) M552 P700 S35
    G1 Xnn Ynn Znn Fnn Move X Y Z F = movement speed G1 X-2.495 Y-1.747 Z0.3200 F1800.0
    G4 Pn Pause n seconds G4 P7

    This is only a handful of entries. I will update it as I get more info. Please contribute whatever you can.
    Last edited by MegaloDon; 03-29-2017 at 01:28 AM.

  2. Thanks bolsoncerrado thanked for this post
    Likes bolsoncerrado liked this post
  3. #2
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    241
    Post Thanks / Like
    M551 P700 S35 = command used for extruder 1 (left) prime when at the waste bin. P700 is amount primed (I think), S35 speed of extrusion(i think)
    M552 Pxxx Sxx = same as above but for extruder 2 (right extruder)

  4. #3
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,027
    Post Thanks / Like
    Found the 3D Builder SDK link...

    https://developer.microsoft.com/en-u...lder-resources

    3dbuildersdk.PNG

    Let's see if we can get some things from there... This isn't the cube3 SDK, but maybe it has some references we could use.

  5. #4
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    420
    Post Thanks / Like
    Quote Originally Posted by Mythandar View Post
    M551 P700 S35 = command used for extruder 1 (left) prime when at the waste bin. P700 is amount primed (I think), S35 speed of extrusion(i think)
    M552 Pxxx Sxx = same as above but for extruder 2 (right extruder)
    Thanks! Updated.

  6. #5
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,027
    Post Thanks / Like
    HA!... !!! I got a print driver to show up in Windows 10 over TCP/IP! I think...

    Anyway, the SDK is a print driver that you can install as a printer if you just ignore a lot of prompts.

    win10drvr.PNG

    yep, somehow I created a TCP/IP port while the printer was printing.

    yeptcp-ip.PNG

    - - - - - - - - - -

    Settings appear to be what 3D Builder has. This does allow you to set defaults.

    driver-inbldr.PNG
    Last edited by TommyDee; 03-25-2017 at 10:55 PM.

  7. #6
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    420
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    HA!... !!! I got a print driver to show up in Windows 10 over TCP/IP! I think...

    yep, somehow I created a TCP/IP port while the printer was printing.
    Can you print to it?

    I wonder if you could have the output go to a file.

  8. #7
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,027
    Post Thanks / Like
    Technically, yes, it does send a .cube3 file straight to the printer over USB.

    The driver, however, is identical.

    It wouldn't let me duplicate the original name... a message easily skipped over.

    It will be 30-someodd minutes until my current print completes.

    There is a "print to file" option in the driver. Not sure if that really functions yet.

    - - - - - - - - - -

    Can't find the print to file yet.

    But I did find a list of dependent 3D Systems DLL files in the driver properties.
    What would something named 3DSystemsCubeMFCCube.dll do? MFC is M$ for BFB

  9. #8
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    420
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    What would something named 3DSystemsCubeMFCCube.dll do? MFC is M$ for BFB
    Are you asking what a dll file is or what that specific dll file is? Either way, I think Mythandar could answer that better than me. I know some coding, and know what dll's are, but haven't really worked with dll's.

  10. #9
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,027
    Post Thanks / Like
    Sometimes I find nuggets in DLL files when you scroll through them.

    - - - - - - - - - -

    This is either an encoder or a decoder... but it has all the variables referencing BFB. I found several such libraries in 3DS DLL's

    3DSystemsCubebfblib.dll ??0BlowFishEnc@@QEAA@PEBD@Z ??0bfb@@QEAA@AEBV0@@Z ??0bfb@@QEAA@PEBDPEAVConfig@@_N@Z ??1BlowFishEnc@@UEAA@XZ ??1bfb@@QEAA@XZ ??4bfb@@QEAAAEAV0@AEBV0@@Z ?AddSquare@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ char_traits@D@std@@V?$allocator@D@2@@std@@MMMMMH@Z ?AddTimeandDist@bfb@@QEAAXMMM@Z ?BlowFishEnc_decipher@BlowFishEnc@@AEAAXPEAK0@Z ?BlowFishEnc_encipher@BlowFishEnc@@AEAAXPEAK0@Z ?BreakAngle@bfb@@QEAANMMMMMM@Z ?CubeType@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?DRM@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char_t raits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?Decipher@BlowFishEnc@@AEAAXAEAI0@Z ?Decipher@BlowFishEnc@@QEAAXQEAEH@Z ?Density@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ch ar_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?DoThePurge@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@MMMM_NH MH@Z ?DwellSecs@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?DwellSteps@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?Encipher@BlowFishEnc@@AEAAXAEAI0@Z ?Encipher@BlowFishEnc@@QEAAXQEAEH@Z ?EnterRestLocation@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ @Z ?EquateMatrices@bfb@@QEAAXQEAY03M0@Z ?ExtractRotationMatrix@bfb@@QEAAXQEAY02MQEAY03M@Z ?ExtruderCurrentAdjustment@bfb@@QEAAXPEAV?$basic_s tringstream@DU?$char_traits@D@std@@V?$allocator@D@ 2@@std@@HH@Z ?F@BlowFishEnc@@AEAAII@Z ?FimrwareVersion@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@PE AD@Z ?GetExtruderDistance@bfb@@QEAAMH@Z ?GetOutputLength@BlowFishEnc@@AEAAKK@Z ?GetTotalMaterial@bfb@@QEAAMXZ ?GetTotalMinutes@bfb@@QEAAMXZ ?Hatch@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char _traits@D@std@@V?$allocator@D@2@@std@@H@Z ?InitToIdentity@bfb@@QEAAXQEAY03M@Z ?Initialization@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z ?LayerThickness@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?LeaveRestLocation@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ @Z ?MatVecMult3x3@bfb@@QEAAXQEAY00MQEAY02M0@Z ?MatVecMult@bfb@@QEAAXQEAY00MQEAY03M0@Z ?MaterialType@bfb@@QEAAXPEAV?$basic_stringstream@D U?$char_traits@D@std@@V?$allocator@D@2@@std@@UMATE RIAL_PROPERTIES@@@Z ?MinFirmwareVersion@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @PEAD@Z ?Move@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char_ traits@D@std@@V?$allocator@D@2@@std@@MMMM@Z ?OutputBinaryCube@bfb@@QEAAHAEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@0 M@Z ?PrintTimeandDist@bfb@@QEAAXXZ ?PrinterType@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?Raft@bfb@@QEAAXPEAV?$basic_stringstream@DU?$char_ traits@D@std@@V?$allocator@D@2@@std@@H@Z ?SET_CUBE_QUICK_LAYER_SETTINGS@bfb@@QEAAXMHHHMH@Z ?SetAccelDeccelRates@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@HH@Z ?SetAccelDeccelStartStop@bfb@@QEAAXPEAV?$basic_str ingstream@DU?$char_traits@D@std@@V?$allocator@D@2@ @std@@HH@Z ?SetAccelDeccelXYThreshold@bfb@@QEAAXPEAV?$basic_s tringstream@DU?$char_traits@D@std@@V?$allocator@D@ 2@@std@@H@Z ?SetAutomaticReverseAndPrime@bfb@@QEAAXPEAV?$basic _stringstream@DU?$char_traits@D@std@@V?$allocator@ D@2@@std@@HH@Z ?SetExtruderSpeed@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H M@Z ?SetExtruderTemp@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HH _N@Z ?SetJumpParams@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HHH@ Z ?SetMaterialE1@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@UMAT ERIAL_PROPERTIES@@@Z ?SetMaterialE2@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@UMAT ERIAL_PROPERTIES@@@Z ?SetMaterialE3@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@UMAT ERIAL_PROPERTIES@@@Z ?SetMaterialLengthE1@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@UMATERIAL_PROPERTIES@@@Z ?SetMaterialLengthE2@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@UMATERIAL_PROPERTIES@@@Z ?SetMaterialLengthE3@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@UMATERIAL_PROPERTIES@@@Z ?SetVectorType@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?SetXsize@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?SetYsize@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?ShortSupportTag@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@_N @Z ?SidewalkBorders@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@_N @Z ?SidewalkPerf@bfb@@QEAAXPEAV?$basic_stringstream@D U?$char_traits@D@std@@V?$allocator@D@2@@std@@MM@Z ?Sidewalks@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?SupportBorders@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@_N@ Z ?Supports@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?ToolChangePurge@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HH H@Z ?ToolChangeReverse@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ HHH@Z ?TotalBuildMaterial@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @M@Z ?TotalBuildTime@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?TotalLayerCount@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H@ Z ?TotalLayerTime@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@MMM @Z ?TotalZLayer@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?TransMatInverse@bfb@@QEAAXQEAY03M0@Z ?TurnExtruderFanOff@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @@Z ?TurnExtruderFanOn@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ @Z ?TurnExtruderFanOn@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ H@Z ?TurnOffAllExtuders@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @@Z ?TurnOffAllExtuders@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @HH@Z ?TurnOffAutoLevelComp@bfb@@QEAAXPEAV?$basic_string stream@DU?$char_traits@D@std@@V?$allocator@D@2@@st d@@@Z ?TurnOnAutoLevelComp@bfb@@QEAAXPEAV?$basic_strings tream@DU?$char_traits@D@std@@V?$allocator@D@2@@std @@@Z ?TurnOnChamberHeat@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ H_N@Z ?TurnOnExtuder@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@HH@Z ?TurnOnExtuderStop@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ HH@Z ?TurnOnExtuderStop@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ HHHH@Z ?Version@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ch ar_traits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?XMLDRM@bfb@@QEAAXPEAV?$basic_stringstream@DU?$cha r_traits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?XMLDensity@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLEndSummary@bfb@@QEAAXPEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z ?XMLFirmwareVersion@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @PEAD@Z ?XMLHatch@bfb@@QEAAXPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLLayerDistance@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H M@Z ?XMLLayerDistanceCalculationDescription@bfb@@QEAAX PEAV?$basic_stringstream@DU?$char_traits@D@std@@V? $allocator@D@2@@std@@@Z ?XMLLayerThickness@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ M@Z ?XMLMinFirmwareVersion@bfb@@QEAAXPEAV?$basic_strin gstream@DU?$char_traits@D@std@@V?$allocator@D@2@@s td@@PEAD@Z ?XMLPrinterType@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLRaft@bfb@@QEAAXPEAV?$basic_stringstream@DU?$ch ar_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLSetCokeBottleNumberE1@bfb@@QEAAXPEAV?$basic_st ringstream@DU?$char_traits@D@std@@V?$allocator@D@2 @@std@@M@Z ?XMLSetCokeBottleNumberE2@bfb@@QEAAXPEAV?$basic_st ringstream@DU?$char_traits@D@std@@V?$allocator@D@2 @@std@@M@Z ?XMLSetCokeBottleNumberE3@bfb@@QEAAXPEAV?$basic_st ringstream@DU?$char_traits@D@std@@V?$allocator@D@2 @@std@@M@Z ?XMLSetMaterialE1@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@U MATERIAL_PROPERTIES@@@Z ?XMLSetMaterialE2@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@U MATERIAL_PROPERTIES@@@Z ?XMLSetMaterialE3@bfb@@QEAAXPEAV?$basic_stringstre am@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@U MATERIAL_PROPERTIES@@@Z ?XMLSetMaterialLengthE1@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialLengthE2@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialLengthE3@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialWeightE1@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialWeightE2@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetMaterialWeightE3@bfb@@QEAAXPEAV?$basic_stri ngstream@DU?$char_traits@D@std@@V?$allocator@D@2@@ std@@M@Z ?XMLSetXsize@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?XMLSetYsize@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?XMLSidewalk@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLStartSummary@bfb@@QEAAXPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z ?XMLSupports@bfb@@QEAAXPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@H@Z ?XMLTotalBuildMaterial@bfb@@QEAAXPEAV?$basic_strin gstream@DU?$char_traits@D@std@@V?$allocator@D@2@@s td@@M@Z ?XMLTotalBuildTime@bfb@@QEAAXPEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ M@Z ?XMLTotalLayerCount@bfb@@QEAAXPEAV?$basic_stringst ream@DU?$char_traits@D@std@@V?$allocator@D@2@@std@ @H@Z ?XMLTotalZLayer@bfb@@QEAAXPEAV?$basic_stringstream @DU?$char_traits@D@std@@V?$allocator@D@2@@std@@M@Z ?XMLVersion@bfb@@QEAAXPEAV?$basic_stringstream@DU? $char_traits@D@std@@V?$allocator@D@2@@std@@PEAD@Z ?area_Tri@bfb@@QEAAMPEAUBFB_VERTICES@@00@Z ?bfbCommandStr@bfb@@QEAAXPEAD@Z ?bte@bfb@@QEAAHXZ ?collinear@bfb@@QEAA_NPEAUBFB_VERTICES@@00@Z ?copyCube@bfb@@QEAAHPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@AEAV23@MH HHHVConfig@@@Z ?copyCubeHershey@bfb@@QEAAHPEAV?$basic_stringstrea m@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@AE AV23@MHHHHVConfig@@@Z ?copyCubeOld@bfb@@QEAAHPEAV?$basic_stringstream@DU ?$char_traits@D@std@@V?$allocator@D@2@@std@@AEAV23 @_NMHHHH@Z ?decryptStream@BlowFishEnc@@UEAAKPEBDKPEAD@Z ?determineZExtents@bfb@@QEAAHXZ ?encryptStream@BlowFishEnc@@UEAAKPEBDKPEAD@Z ?getLayerDistance@bfb@@QEAAMM@Z ?getLayerNumber@bfb@@QEAAMXZ ?getLayerTime@bfb@@QEAAMM@Z ?loadCube@bfb@@QEAAHPEAV?$basic_stringstream@DU?$c har_traits@D@std@@V?$allocator@D@2@@std@@HH_NP6AXH @ZM@Z ?matmult@bfb@@QEAAXQEAY03M00@Z ?quickLayerAdjust@bfb@@QEAA_NAEAV?$basic_stringstr eam@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@ 0PEAVPrintMode@@MHH@Z ?summaryOutput@bfb@@QEAAHAEAV?$basic_stringstream@ DU?$char_traits@D@std@@V?$allocator@D@2@@std@@0@Z

    - - - - - - - - - -

    and it goes on with some encryption tips for Blowfish...

    lowFishEnc@@6B@ ??_7EncryptionInterface@@6B@  ??1EncryptionInterface@@UEAA@XZ  ??0EncryptionInterface@@QEAA@PEBD@Z 3DSystemsCubeUtilities.dll ?HeapReAlloc 8HeapAlloc <HeapFree GetProcessHeap RInitializeCriticalSectionEx DRaiseException VGetLastError AHeapSize DecodePointer DeleteCriticalSection OutputDebugStringA SetLastError QInitializeCriticalSectionAndSpinCount iGetModuleFileNameW lGetModuleHandleExW LoadLibraryW CreateActCtxW  ActivateActCtx DeactivateActCtx jFindActCtxSectionStringW %QueryActCtxW PInitializeCriticalSection )EnterCriticalSection LeaveCriticalSection ‚TlsAlloc „TlsGetValue …TlsSetValue ƒTlsFree GlobalAlloc .GlobalReAlloc +GlobalLock *GlobalHandle 2GlobalUnlock 'GlobalFree LocalAlloc LocalReAlloc LocalFree SetErrorMode  CloseHandle WaitForSingleObject GetCurrentThreadId CSetThreadPriority ResumeThread LoadResource LockResource `SizeofResource FindResourceW /GlobalSize MulDiv FormatMessageW CopyFileW MultiByteToWideChar WideCharToMultiByte %EncodePointer GetSystemDirectoryW FreeLibrary FreeResource mGetModuleHandleW GetProcAddress LoadLibraryExW "GlobalDeleteAtom lstrcmpW GlobalAddAtomW $GlobalFindAtomW &GlobalFlags GetCurrentProcessId lstrcmpA )GlobalGetAtomNameW cFileTimeToSystemTime GetVersionExW “ CompareStringW ZGetLocaleInfoW GetUserDefaultUILanguage CreateFileW nFindClose yFindFirstFileW ˜FlushFileBuffers BGetFileSize PGetFullPathNameW GetVolumeInformationW LockFile TReadFile SetEndOfFile SetFilePointer “UnlockFile WriteFile #DuplicateHandle GetCurrentProcess lstrcmpiW GetCurrentDirectoryW bFileTimeToLocalFileTime <GetFileAttributesW 9GetFileAttributesExW CGetFileSizeEx DGetFileTime lstrcpyW GetWindowsDirectoryW VerSetConditionMask VerifyVersionInfoW GetTempFileNameW GetTempPathW aSleep GetTickCount GetProfileIntW SearchPathW VirtualProtect GetUserDefaultLCID ŽFindResourceExW jIsDebuggerPresent pIsProcessorFeaturePresent GetCommandLineA RtlUnwindEx RtlPcToFileHeader RtlLookupFunctionEntry CreateThread XExitThread >HeapQueryInformation WExitProcess GetSystemInfo VirtualAlloc VirtualQuery GetSystemTimeAsFileTime 0SetStdHandle EGetFileType uIsValidCodePage GetACP GetOEMCP GetCPInfo GetStdHandle GetStartupInfoW RtlCaptureContext RtlVirtualUnwind ’UnhandledExceptionFilter RSetUnhandledExceptionFilter pTerminateProcess hGetModuleFileNameA 0QueryPerformanceCounter .GetEnvironmentStringsW FreeEnvironmentStringsW GetTimeZoneInformation GetStringTypeW GetConsoleCP GetConsoleMode RReadConsoleW SetFilePointerEx wIsValidLocale LEnumSystemLocalesW ™LCMapStringW OutputDebugStringW WriteConsoleW SetEnvironmentVariableA KERNEL32.dll QUnregisterClassW KUnhookWindowsHookEx uGetMessageW GTranslateMessage DispatchMessageW pPeekMessageW SendMessageW IsWindowVisible GetActiveWindow UGetKeyState kValidateRect 5GetCursorPos SetWindowsHookExW  CallNextHookEx pGetMenuStringW nGetMenuState GetSubMenu jGetMenuItemID iGetMenuItemCount InsertMenuW
    AppendMenuW RemoveMenu DrawTextW DrawTextExW GrayStringW 9TabbedTextOutW 6GetDC GetWindowDC ReleaseDC  BeginPaint EndPaint I ClientToScreen ScreenToClient GetSysColor FillRect DGetFocus ? CheckMenuItem EnableMenuItem SetMenuItemBitmaps eGetMenuCheckMarkDimensions SetMenuItemInfoW |GetParent !LoadBitmapW RegisterWindowMessageW sGetMessagePos tGetMessageTime tPostMessageW DefWindowProcW  CallWindowProcW ŽRegisterClassW GetClassInfoW GetClassInfoExW q CreateWindowExW IsWindow IsChild ­ DestroyWindow SetWindowPos GetWindowPlacement SetWindowPlacement
    BeginDeferWindowPos DeferWindowPos EndDeferWindowPos >GetDlgItem =GetDlgCtrlID SetFocus GetCapture EnableWindow cGetMenu SetMenu ATrackPopupMenu _UpdateWindow SetActiveWindow EGetForegroundWindow SetForegroundWindow ‰RedrawWindow ScrollWindow SetScrollPos GetScrollPos SetScrollRange GetScrollRange %ShowScrollBar SetPropW ˜GetPropW ­RemovePropW GetWindowTextW GetWindowTextLengthW 'GetClientRect GetWindowRect  AdjustWindowRectEx QMessageBoxW EMapWindowPoints W CopyRect EqualRect ~PtInRect GetWindowLongW SetWindowLongW GetWindowLongPtrW SetWindowLongPtrW "GetClassLongPtrW %GetClassNameW GetTopWindow \GetLastActivePopup GetWindow 'LoadIconW SetScrollInfo GetScrollInfo yWinHelpW VMonitorFromWindow wGetMonitorInfoW (ShowWindow WMoveWindow > CheckDlgButton IsWindowEnabled SetWindowTextW IsDialogMessageW 9GetDesktopWindow ‚RealChildWindowFromPoint GetWindowThreadProcessId GetSystemMetrics GetSysColorBrush %LoadCursorW InflateRect IntersectRect DestroyMenu lGetMenuItemInfoW 7SystemParametersInfoW V CopyImage SendDlgItemMessageA uPostQuitMessage DestroyIcon < CharUpperW $ShowOwnedPopups SetCursor DeleteMenu SetTimer KillTimer InvalidateRect IsIconic yGetNextDlgGroupItem SetCapture ReleaseCapture |WindowFromPoint DrawFocusRect SetRectEmpty aOffsetRect
    IsRectEmpty )LoadImageW DrawIconEx KGetIconInfo zGetNextDlgTabItem IMessageBeep GetAsyncKeyState EnableScrollBar HideCaret InvertRect [NotifyWinEvent n CreatePopupMenu gGetMenuDefaultItem DMapVirtualKeyW d CreateDialogIndirectParamW EndDialog 1LoadMenuW SetLayeredWindowAttributes EnumDisplayMonitors bOpenClipboard K CloseClipboard SetClipboardData EmptyClipboard DrawStateW DrawEdge DrawFrameControl SetWindowRgn LUnionRect IsMenu \UpdateLayeredWindow TMonitorFromPoint  BringWindowToTop LoadAcceleratorsW ETranslateAcceleratorW InsertMenuItemW OUnpackDDElParam ReuseDDElParam TGetKeyNameTextW @TrackMouseEvent 0GetComboBoxInfo IsZoomed GetSystemMenu wPostThreadMessageW wWaitMessage VGetKeyboardLayout IsCharLowerW CMapVirtualKeyExW ?ToUnicodeEx ZGetKeyboardState Z CreateAcceleratorTableW DestroyAcceleratorTable T CopyAcceleratorTableW SetCursorPos SetRect SetParent 7LockWindowUpdate SetClassLongPtrW BGetDoubleClickTime U CopyIcon SetMenuDefaultItem SModifyMenuW RegisterClipboardFormatW ; CharUpperBuffW FrameRect DrawMenuBar œ DefFrameProcW ž DefMDIChildProcW FTranslateMDISysAccel IsClipboardFormatAvailable GetUpdateRect 1SubtractRect m CreateMenu @MapDialogRect DestroyCursor GetWindowRgn DrawIcon USER32.dll ( CopyMetaFileW 3 CreateDCW GetDeviceCaps  BitBlt ) CreateBitmap 1 CreateCompatibleDC D CreateHatchBrush L CreatePen K CreatePatternBrush P CreateRectRgn V CreateSolidBrush DeleteDC DeleteObject WEscape ZExcludeClipRect GetClipBox (GetObjectType 0GetPixel 9GetStockObject TGetViewportExtEx WGetWindowExtEx \IntersectClipRect bLineTo PtVisible ”RectVisible ŸRestoreDC SaveDC SelectClipRgn _ExtSelectClipRgn SelectObject SelectPalette SetBkColor SetBkMode SetMapMode SetLayout GetLayout SetPolyFillMode SetROP2 SetTextColor SetTextAlign )GetObjectW pMoveToEx TextOutW aExtTextOutW SetViewportExtEx SetViewportOrgEx
    SetWindowExtEx SetWindowOrgEx tOffsetViewportOrgEx uOffsetWindowOrgEx ScaleViewportExtEx ScaleWindowExtEx " CombineRgn A CreateFontIndirectW Q CreateRectRgnIndirect |PatBlt SetRectRgn DPtoLP JGetTextExtentPoint32W J CreatePalette #GetNearestPaletteIndex ,GetPaletteEntries >GetSystemPaletteEntries ’RealizePalette GetBkColor RGetTextMetricsW 0 CreateCompatibleBitmap 7 CreateDIBitmap OEnumFontFamiliesW CGetTextCharsetInfo SetPixel StretchBlt 6 CreateDIBSection SetDIBColorTable 9 CreateEllipticRgn Ellipse DGetTextColor O CreatePolygonRgn ŒPolygon Polyline •Rectangle NEnumFontFamiliesExW 8GetRgnBox sOffsetRgn R CreateRoundRectRgn RoundRect pFrameRgn PtInRegion SetPixelV ^ExtFloodFill SetPaletteEntries kFillRgn GetBoundsRect XGetWindowOrgEx `LPtoDP UGetViewportOrgEx PGetTextFaceW GDI32.dll AlphaBlend  TransparentBlt MSIMG32.dll – OpenPrinterW O DocumentPropertiesW  ClosePrinter WINSPOOL.DRV TRegCloseKey ]RegCreateKeyExW hRegDeleteKeyW …RegOpenKeyExW ’RegQueryValueExW lRegDeleteValueW sRegEnumKeyExW RegSetValueExW ADVAPI32.dll SHGetFileInfoW 7ShellExecuteW SHGetPathFromIDListW SHGetSpecialFolderLocation SHGetDesktopFolder $ DragQueryFileW DragFinish ƒ SHBrowseForFolderW z SHAppBarMessage SHELL32.dll K PathFindExtensionW M PathFindFileNameW u PathIsUNCW › PathStripToRootW 7StrFormatKBSizeW PathRemoveFileSpecW SHLWAPI.dll  DrawThemeText  DrawThemeParentBackground M OpenThemeData CloseThemeData
    DrawThemeBackground * GetThemeColor  GetCurrentThemeName G IsAppThemed J IsThemeBackgroundPartiallyTransparent : GetThemeSysColor E GetWindowTheme 3 GetThemePartSize UxTheme.dll ~ CoTaskMemAlloc  CoTaskMemFree •OleDuplicateData ReleaseStgMedium ' CoDisconnectObject  CoCreateInstance ƒ CoUninitialize S CoInitialize T CoInitializeEx ž CreateStreamOnHGlobal DoDragDrop OleLockRunning ŽOleCreateMenuDescriptor ’OleDestroyMenuDescriptor OleTranslateAccelerator 1IsAccelerator ˜OleGetClipboard \ CoLockObjectExternal RegisterDragDrop RevokeDragDrop ole32.dll OLEAUT32.dll  LresultFromObject  AccessibleObjectFromWindow  CreateStdAccessibleObject OLEACC.dll tGdiplusShutdown ! GdipAlloc GdipFree uGdiplusStartup 6 GdipCloneImage ˜ GdipDisposeImage !GdipGetImageGraphicsContext ,GdipGetImageWidth "GdipGetImageHeight 'GdipGetImagePixelFormat %GdipGetImagePalette &GdipGetImagePaletteSize Q GdipCreateBitmapFromStream P GdipCreateBitmapFromScan0 + GdipBitmapLockBits . GdipBitmapUnlockBits GdipDeleteGraphics GdipDrawImageI M GdipCreateBitmapFromHBITMAP [ GdipCreateFromHDC GdipSetInterpolationMode GdipDrawImageRectI gdiplus.dll ; ImmGetContext k ImmReleaseContext M ImmGetOpenStatus IMM32.dll  PlaySoundW WINMM.dll

  11. #10
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    420
    Post Thanks / Like
    I ran that through my magic decoder ring and it says "whatthefckareyoudoingtryingtodecodemypropriatarye ncryptedsht".
    Last edited by MegaloDon; 03-26-2017 at 05:52 PM.

 

 

Similar Threads

  1. [ HOW TO ] Use other slicers with cube 3
    By Mythandar in forum Cube3
    Replies: 251
    Last Post: 11-16-2017, 05:59 AM
  2. [ THING ] Printable Cube 3 Filament (re)Winder
    By chaman in forum Cube3
    Replies: 25
    Last Post: 08-01-2017, 04:35 PM
  3. Cube 3 enclosure
    By Bleky in forum Cube3
    Replies: 31
    Last Post: 03-31-2017, 04:34 PM
  4. ERROR Code T24: Temperature Error
    By bolsoncerrado in forum Cube3
    Replies: 3
    Last Post: 03-02-2017, 04:35 PM
  5. Converting 12v/24v power supply to remote (G-code) switching
    By bolsoncerrado in forum 3D Hardware
    Replies: 9
    Last Post: 06-30-2016, 04:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •