Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Feb 2015
    Post Thanks / Like

    should i throw away my printer?

    I have one of the first rapide lite 200, but didn't had the time to assemble it at the time. So I just assembled it and conected it for the first time.
    I can connect to it with Repetier Host but the printer doesn't seem to take any commands. Does the stock Rapid lite board even work or do i need to change the board? Does the stock printer even work without any changes?

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Post Thanks / Like
    Yes, its supposed to work, although it will fail sooner or later. Where are you from?

  3. #3
    Regular 3D Printer
    Join Date
    Dec 2014
    Post Thanks / Like
    Mine's been running fine for two years, must've put at least 20 kg of filament through it without any board issues, so luck of the draw i guess.. Worn through a few extruder bits though



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts