-
05-30-2017, 04:06 AM
#131
I've had something like where you ended up, yes.
This makes for a nice fitting-less adapter...
Edit: This was easy to incorporate in place of the fitting at a lower level.
Turns out the #8-32 nut is bigger than the metric M4 nut so this should be easy to incorporate.
Got a print running with this and it is solid as a rock!
adapter.PNG
Last edited by TommyDee; 05-30-2017 at 06:26 AM.
-
06-19-2017, 01:52 AM
#132
I posted a new fully functioning version of this here:
http://www.print3dforum.com/showthre...-The-Filament)
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes