Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Layer thickness

  1. #1
    3D Printer Noob
    Join Date
    Dec 2015
    Posts
    4
    Post Thanks / Like

    Layer thickness

    Has anyone been able to or know how to print lower then 100um ? I have adjusted settings in my nanodlp settings but the prints turn out stretched only in the z hight resolution.

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,060
    Post Thanks / Like
    Thats weird. I print FDM resin at 75micron with no issues :??

  3. #3
    3D Printer Noob
    Join Date
    Apr 2017
    Posts
    6
    Post Thanks / Like
    I believe the X & Y will be linked right up to the pixel dimension of the LCD screen are thus fairly immutable.

    Z seems like it should be able to be changed through a combination of curing time and stepper movement - with micro stepping and a 10 TPI leadscrew you're already into the ten thousandths of an inch positioning range.

  4. #4
    3D Printer Noob
    Join Date
    Dec 2015
    Posts
    4
    Post Thanks / Like
    do you use nanodlp? if so can you send me your setting?

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •