Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    May 2017
    Posts
    1
    Post Thanks / Like

    Want to try ABS for first time

    Do I need to change nozzle head or just increase my temp?

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    2,936
    Post Thanks / Like
    INcrease temp, and enclose your printer.

  3. #3
    3D Printer Noob
    Join Date
    Dec 2017
    Posts
    1
    Post Thanks / Like
    I prefer ABS. Here's my settings:

    1) Clean glass bed with decent window cleaner.
    2) Set bed temp 110 degrees.
    3) Nozzle temp 230 degrees.

    On completion when bed cools to about 70 degrees the print pops off. You don't need to force it off.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •